cxa1599q Sony Electronics, cxa1599q Datasheet

no-image

cxa1599q

Manufacturer Part Number
cxa1599q
Description
1-chip Cassette Deck
Manufacturer
Sony Electronics
Datasheet
For the availability of this product, please contact the sales office.
Description
All analog signal processing functions, except Dolby
NR, are incorporated in a single chip. As a result, a
double cassette deck system can be simply
configured by adding a Dolby IC.
Features
• Electronic recording volume for setting recording
• Recording equalizer amplifier
• Recording mute function
• Playback head amplifier switch function
• NR pass amplifier (NR IN/PASS switch)
• Headphone amplifier with electronic volume
• Full-wave rectifier output amplifier for level meter
• HPF amplifier for AMS
• Electronic switch for tape EQ selection
• Electronic switch for metal tape selection
• Electronic switch for normal/double speed dubbing
• Line mute function
• Double cassette dubbing system can be easily
level (with a balance volume)
(with
functions)
(soft mute and fader possible)
(deck A/B switch)
(with time constant function)
(with BS/AMS gain switch function)
(120µs/70µs)
selection (only for recording equalizer)
configured with this single IC.
The CXA1599Q is an IC for audio cassette decks.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
1-chip Cassette Deck
calibration
and
low
frequency
boost
– 1 –
Applications
stereo analog cassette deck
(ALPS ELECTRIC CO., LTD. HADKH-55460 head
applicable)
Structure
Absolute Maximum Ratings (Ta = 25°C)
• Supply voltage
• Operating temperature
• Storage temperature
• Allowable power dissipation P
Operating Conditions
Analog signal processing (except Dolby NR) for
Bipolar silicon monolithic IC
Supply voltage
CXA1599Q
(positive/negative dual power supply)
48 pin QFP (Plastic)
(single power supply)
V
V
Topr –20 to +75 °C
Tstg –65 to +150 °C
CC
D
CC
±5.0 to ±8.0 V
10.0 to 16.0 V
735
17
E92Y05-ST
mW
V

Related parts for cxa1599q

cxa1599q Summary of contents

Page 1

... Cassette Deck For the availability of this product, please contact the sales office. Description The CXA1599Q for audio cassette decks. All analog signal processing functions, except Dolby NR, are incorporated in a single chip result, a double cassette deck system can be simply configured by adding a Dolby IC ...

Page 2

... REC VOL REC VOL NR/PASS NR/PASS 2 PB HEAD PB HEAD REC CALIBRATION – 2 – CXA1599Q MODE 4 CONTROL 23 METAL 22 SPEED 34 21 REC MUTE AMS/BS 20 AMS OUT 2 19 DVcc METER 18 DGND 17 Vcc ...

Page 3

... 54k – 3 – CXA1599Q = –7V, DVcc = 5V, No signal) EE Description Connects the external V capacitor for low CC frequency boost of recording equalizer amplifier. When low frequency boost is not executed: During positive/ negative dual power supply Connect to GND. ...

Page 4

... VGS 48 38 VGS 60k 10 33 40k DGND V EE – 4 – CXA1599Q Description Calibration for overall frequency gain recording equalizer amplifier. Controls by applying the DC voltage of DGND to DVcc. High Gain up DREF Low Gain down When recording V EE calibration function is not used, keep this pin open ...

Page 5

... 30k 500 15k To each DREF 500 30k 4 V DGND – 5 – CXA1599Q Description V CC Output of headphone volume Output of level meter amplifier V EE During positive/negative dual power supply Connect to negative power supply. During single power supply Connect to GND ...

Page 6

... 10k 27 29 DGND – 6 – CXA1599Q Description Output of AMS/BS amplifier. Mute ON/OFF switch of recording equalizer V CC amplifier. Controls by applying the DC voltage of DGND to DVcc. High Mute OFF Low Mute ON Soft mute/fader switch is possible by changing the time constant of the ...

Page 7

... VGS VGS 70k 11k 11k 30k 21K DREF V EE – 7 – CXA1599Q Description Deck B equalizer switch High 70µs EQ (CrO tape) 2 Low 120µs EQ (Norm tape) NR/PASS input switch High PASS IN Low NR IN Deck A equalizer switch High 70µs EQ Low 120µ ...

Page 8

... VGS 500 14k 40 45 500 – 8 – CXA1599Q Description 500 500 7 VGS V EE Line output 20k 14k VGS V EE Connects the playback equalizer amplifier output through DC cut off. Input for signals not passing Dolby decode ...

Page 9

... 200 – 9 – CXA1599Q Description Output of recording volume each VGS During positive/negative dual power supply Connect to GND. EE During single power supply Connect a capacitor (over 10µF) to remove center ripple. Reference current setting for recording/ playback equalizer ...

Page 10

... By inputting 8 kHz signal attenuated from reference by –20dB to REC IN pin, relative deviation is measured for NORM-NS at 315Hz. NORM-Tape, NORM-Speed mode By inputting 12kHz signal attenuated from reference by –20dB to REC IN pin, relative deviation is measured for NORM-NS at 315Hz. – 10 – CXA1599Q = –7V, DVcc = 5V) EE Min. Typ. Max. Unit 23.0 31.0 39.0 mA ± ...

Page 11

... By inputting 15kHz signal attenuated from reference by –20dB to REC IN pin, relative deviation is measured for NORM-NS at 315Hz. CrO -Tape, HIGH-Speed mode 2 By inputting 20kHz signal attenuated from reference by –20dB to REC IN pin, relative deviation is measured for NORM-NS at 315Hz. – 11 – CXA1599Q Min. Typ. Max. Unit 4.3 6.2 7.9 dB 9.0 11 ...

Page 12

... NORM-Tape, NORM-Speed mode, REC-CAL = 5.0V By inputting 315Hz signal attenuated from reference by –20dB, REC-CAL function is measured as variation from standard mode. NORM-Tape, NORM-Speed mode, REC-CAL = 0.0V By inputting 315Hz signal attenuated from reference by –20dB, REC-CAL function is measured as variation from standard mode. – 12 – CXA1599Q Min. Typ. Max. Unit 1.5 3.2 4.7 dB 3.4 5.9 8 ...

Page 13

... REC-VOL = 5.0V, REC-BAL = 2.5V, Rin = 47k Noise is measured using "A" weighting filter with no signal. (Measured value is shown in relative value to full gain.) REC-VOL = 5.0V, REC-BAL = 2.5V, Rin = 47k DC offset voltage is measured at VOL OUT pin with no signal. – 13 – CXA1599Q Min. Typ. Max. Unit. 1.4 3.2 5.5 dB –5.8 –3.7 – ...

Page 14

... NR IN pin, attenuation is measured during line mute. (Using 1kHz BPF) HP-VOL = 5.0V, NR Pass = 1.0V, line mute = 2.5V Full gain of HP volume amplifier at 1kHz is measured. HP-VOL = 2.0V, NR Pass = 1.0V, line mute = 2.5V Attenuation of HP volume amplifier at 1kHz is measured. – 14 – CXA1599Q Min. Typ. Max. Unit — –55.0 –44.0 dB — –55.0 – ...

Page 15

... By inputting 5kHz, –31.0dBv (reference input level) signal, relative deviation is measured at 120µs, 315Hz. A-DECK, A-EQ = 70µs, NORM-Speed mode By inputting 5kHz, –31.0dBv (reference input level) signal, relative deviation is measured at 120µs, 315Hz. – 15 – CXA1599Q Min. Typ. Max. Unit — –81.0 –77.0 dB 10.0 11.0 — ...

Page 16

... By inputting 1kHz, –31.0dBv (reference input level) signal pins (Pins 8/9), relative value is measured to PB OUT. NR Pass = 2.5V, A-DECK, 120µs-NS, line mute off DC offset voltage is measured with no signal at LINE OUT pin. – 16 – CXA1599Q Min. Typ. Max. Unit –0.6 0.4 1.6 dB –4.7 – ...

Page 17

... AMS, A-DECK, A-EQ = 120µs, NORM-Speed mode DC offset voltage is measured with no signal at AMS OUT pin. BS, A-DECK, A-EQ = 120µs, NORM-Speed mode DC offset voltage is measured with no signal at AMS OUT pin. – 17 – CXA1599Q Min. Typ. Max. Unit 35.3 36.8 38.3 dB –4.5 –3.0 – ...

Page 18

... R66 CAL REC S44 CAL GP S41 1.0µ C38 2.7k OUT2 REC 1.0µ C36 2.7k OUT1 REC BOOST1 GND GND – 18 – CXA1599Q C57 C52 100 R86 S35 R87 10k R85 S34 R84 100 R83 S33 10k R82 S32 C49 C47 C45 C42 S45 ...

Page 19

... LINE IN2 IN1 24k R5 SSK SSK 0.0022µ IN2 VF IN1 VF C11 C10 SSK2 SSK1 VCT2 VCT1 0.56µ C7 TCH2 TCH1 0.33µ 0.33µ TCL2 TCL1 2.2µ OUT 1 OUT REC REC REF I VCT0 GND VCC – 19 – CXA1599Q GND GND GND GND ...

Page 20

... Recording equalizer frequency characteristics (Double speed) 35 0dB = –23dBv (NORM-NS mode, 315Hz at REC OUT –10 0.125 Playback equalizer frequency characteristics 0.05 0.1 CrO -NS 2 METAL-NS NORM-NS 1.0 10 Frequency (kHz) CrO -HS 2 METAL-HS NORM-HS 1.0 10 Frequency (kHz) 120µs 70µs 1.0 Frequency (kHz) – 20 – CXA1599Q ...

Page 21

... REC CAL control (V) Gp CAL : Max. Gp CAL : Typ. Gp CAL : Min. REC CAL : Max. REC CAL : Typ. REC CAL : Min. 1.0 10 Frequency (kHz) REC MUTE charateristics 0 –10 – –30 –40 – –60 –70 – – 21 – CXA1599Q REC MUTE control (V) ...

Page 22

... REC BAL control (V) Level meter output characteristics 5.0 2.0 Input: PASS IN 1.0 0.5 0.2 5.0 –50 –40 –30 A.M.S./B.S. frequency characteristics B.S. A.M.S. A-DECK, 120µs mode Input : PB IN, –51dBv PB OUT and PASS IN are connected via a capacitance. 0.1 1.0 Frequency (kHz) – 22 – CXA1599Q OUT2 DV = 1kHz –20 –10 0 Input level (dBv) 10 ...

Page 23

... SONY CODE EIAJ CODE JEDEC CODE 48PIN QFP (PLASTIC 0.15 0.3 – 0.1 ± 0. 0.35 2.2 – 0.15 PACKAGE STRUCTURE PACKAGE MATERIAL LEAD TREATMENT QFP-48P-L04 LEAD MATERIAL QFP048-P-1212-B PACKAGE WEIGHT – 23 – CXA1599Q + 0.1 0.15 – 0.05 0.15 + 0.2 0.1 – 0.1 EPOXY RESIN SOLDER / PALLADIUM PLATING COPPER / 42 ALLOY 0.7g ...

Related keywords