icx429alb Sony Electronics, icx429alb Datasheet

no-image

icx429alb

Manufacturer Part Number
icx429alb
Description
Diagonal 8mm Type 1/2 Ccd Image Sensor Forccir B/w Video Cameras
Manufacturer
Sony Electronics
Datasheet
Description
image sensor suitable for CCIR B/W video cameras
with a diagonal 8mm (Type 1/2) system. Basic
characteristics such as sensitivity, smear, dynamic
range and S/N are improved drastically through the
adoption of EXview HAD CCD
an electronic shutter with variable charge-storage
time. Also, this outline is miniaturized by using
original package. This chip is compatible with the
pins of the ICX249ALB and has the same drive
conditions.
characteristics from the curreent CCD.
Features
• High sensitivity
• Low smear
• High D range (+1dB compared with the ICX249AL)
• High S/N
• High resolution and low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• Substrate bias:
• Reset gate pulse:
• Horizontal register:
• Maximum package dimensions: φ13.2mm
Device Structure
• Interline CCD image sensor
• Optical size:
• Number of effective pixels: 752 (H) × 582 (V) approx. 440K pixels
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
∗ EXview HAD CCD is a trademark of Sony Corporation.
The ICX429ALB is an interline CCD solid-state
This chip features a field period readout system and
EXview HAD CCD
EXview HAD CCD is a CCD that drastically improves light efficiency by including near infrared light
Diagonal 8mm (Type 1/2) CCD Image Sensor for CCIR B/W Video Cameras
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
TM
has differrent spectral
Diagonal 8mm (Type 1/2)
795 (H) × 596 (V) approx. 470K pixels
7.40mm (H) × 5.95mm (V)
8.6µm (H) × 8.3µm (V)
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
Vertical (V) direction:
Horizontal 22
Vertical 1 (even fields only)
Silicon
TM
Adjustment free (external adjustment also possible with 6 to 14V)
5Vp-p adjustment free (drive also possible with 0 to 9V)
5V drive
technology.
TM
– 1 –
Front 12 pixels, rear 2 pixels
ICX429ALB
3
V
Pin 9
Optical black position
16 pin DIP (Ceramic)
(Top View)
H
Pin 1
40
12
2
E01926A41

Related parts for icx429alb

icx429alb Summary of contents

Page 1

... Diagonal 8mm (Type 1/2) CCD Image Sensor for CCIR B/W Video Cameras Description The ICX429ALB is an interline CCD solid-state image sensor suitable for CCIR B/W video cameras with a diagonal 8mm (Type 1/2) system. Basic characteristics such as sensitivity, smear, dynamic range and S/N are improved drastically through the ...

Page 2

... The terms and conditions in the Sony additional specifications, which will be made available to you when you order the Products, shall also be applicable to your use of the Products as well as to this specifications book. You should review those terms and conditions when you consider purchasing and/or using the Products. – 2 – ICX429ALB ...

Page 3

... Note) Note) : Photo sensor 16 Symbol Description NC NC GND GND RD Reset drain bias φ Reset gate clock RG V Substrate bias circuit supply voltage DSUB Hφ Horizontal register transfer clock 1 Hφ Horizontal register transfer clock 2 ICX429ALB ...

Page 4

... Vφ SUB – – 4 – Ratings Unit Remarks –0.3 to +50 V –0.3 to +18 V –55 to +10 V – +10 V ∗ +17 V –17 to +17 V –10 to +15 V –55 to +10 V –65 to +0.3 V –0.3 to +30 V –30 to +80 °C –10 to +60 °C ICX429ALB ...

Page 5

... 7.5 8.0 8.5 9.0 9.5 10.0 = 9.0V SUB Symbol Min. Typ. I 5.0 DD – 5 – Typ. Max. Unit Remarks 15.0 15.45 V 15.0 15. ∗ 1 15.45 V 15.0 ∗ 2 Typ. Max. Unit Remarks 15.0 15.45 V 15.0 15. ∗ 3 ∗ 4 ∗ 14 ∗ 10.5 11.0 11.5 12.0 12.5 13.0 Max. Unit Remarks 10.0 mA ICX429ALB 13.5 14.0 ...

Page 6

... VL3 Vφ – High-level coupling 2 V High-level coupling 2 V Low-level coupling 2 V Low-level coupling Low-level coupling 4 5 Waveform Remarks diagram ICX429ALB )/2 VH2 )/2 VL4 ...

Page 7

... Cφ V2 Cφ V23 Cφ Vφ 3 Horizontal transfer clock equivalent circuit – 7 – Min. Typ. Max. Unit 3300 pF 3300 pF 820 pF 330 pF 120 680 pF Ω 75 Ω 82 Ω 68 Cφ HH Cφ Cφ ICX429ALB Remarks Hφ 2 ...

Page 8

... twh tf Vφ VHH V VHL V VHL V VL3 Vφ VHL V VLH V VLL V VL4 – 8 – φM φ VHH VHH V VHL V VH3 V VLL VHH VHH VHL V VHL V VH4 V VLH V VL ICX429ALB V VLH ...

Page 9

... Vφ H twl Point A is the minimum value of the coupling waveform during the period from RGLL . RGLm Vφ SUB 0% tr twh tf – 9 – ICX429ALB twl tr twh tf V RGH Vφ 0.5V RGL V RGL is the average value of V RGL RGLH φM φM ...

Page 10

... Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 2.5 0 5.38 5. 1.8 two Min. Typ. Max. , Hφ – 10 – Unit 0.5 µs During readout ∗ 15 250 ns ∗ 0.01 0.01 µs 0.01 0. When draining 0.5 0.5 µs charge Unit Remarks ∗ and Hφ is two ICX429ALB Remarks 1 2 ...

Page 11

... H 8 582 (V) Zone Zone II, II' Ignored region Effective pixel region – 11 – (Ta = 25°C) Measurement Remarks method 60° Zone 0 and I 5 Zone 60° 60° ICX429ALB ...

Page 12

... the center of the screen and substitute the value into the S2 – 12 – ICX429ALB ...

Page 13

... Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following formula. Lag = (Vlag/200) × 100 [%] FLD V1 Strobe light timing Output 1 × [dB] (1/10V method conversion value) 10 Light signal output 200mV Ylag (lag) – 13 – ICX429ALB ...

Page 14

... ICX429ALB ...

Page 15

... ICX429ALB ...

Page 16

... Spectral Sensitivity Characteristics (Excludes lens characteristics and light source characteristics) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 400 Sensor Readout Clock Timing Chart V1 V2 Odd Field Even Field V3 V4 500 600 700 Wave Length [nm] 2.5 1.5 33.6 0.2 – 16 – 800 900 1000 2.6 2.5 2.5 Unit: µs ICX429ALB ...

Page 17

... ICX429ALB ...

Page 18

... ICX429ALB ...

Page 19

... Do not expose to strong light (sun rays) for long periods. For continuous using under cruel condition exceed- ing the normal using condition, consult our company. 5) Exposure to high temperature or humidity will affect the characteristics. Accordingly avoid storage or usage in such conditions. 6) CCD image sensors are precise optical equipment that should not be subject to too much mechanical shocks. – 19 – ICX429ALB ...

Page 20

... ICX429ALB Sony Corporation ...

Related keywords