em78p468l ELAN Microelectronics Corp, em78p468l Datasheet - Page 48

• Manufacturer Part Number: em78p468l
• Description: 8-bit Microcontroller
• Manufacturer: ELAN Microelectronics Corp

EM78P468N/EM78P468L
8-Bit Microcontroller
42 •
Fcarrier
IROUT
Fcarrier
IRE
IROUT
HF
IRE
HF
start
start
The IROUT output waveform is further explained in the following figures:
Fig. 6-21 LGP=0, HF=1, the IROUT waveform can modulate Fcarrier waveform when
Fig. 6-22 LGP=0, HF=0, the IROUT waveform cannot modulate Fcarrier waveform
Fig. 6-23 LGP=0, HF=1, the IROUT waveform can modulate Fcarrier waveform when
Fig. 6-24 LGP=0, HF=0, the IROUT waveform can not modulate Fcarrier waveform
Fig.6-25 LGP=1, when this bit is set to high level, the high-pulse width timer is
low-pulse width
low-pulse width
in low-pulse width time.
when in low-pulse width time.
high-pulse time and low-pulse time. This mode can produce standard PWM
waveform.
in low-pulse width time. When IRE goes from high to low, the output
waveform of IROUT will keep on transmitting until high-pulse width timer
interrupt occurs.
when in low-pulse width time. So IROUT waveform is determined by
high-pulse time and low-pulse time. This mode can produce standard PWM
waveform. When IRE goes from high to low, the output waveform of IROUT
will keep on transmitting till high-pulse width timer interrupt occurs.
ignored. So IROUT waveform output from low-pulse width timer is
established.
Fig. 6-21 LGP=0, IROUT Pin Output Waveform
Fig. 6-22 LGP=0, IROUT Pin Output Waveform
high-pulse width
high-pulse width
low-pulse width
low-pulse width
(This specification is subject to change without further notice)
So IROUT waveform is determined by
Product Specification (V1.5) 02.15.2007
high-pulse width
high-pulse width