ATMEGA8L ATMEL [ATMEL Corporation], ATMEGA8L Datasheet - Page 15

• Manufacturer Part Number: ATMEGA8L
• Description: 8-bit AVR with 8K Bytes In-System Programmable Flash
• Manufacturer: ATMEL [ATMEL Corporation]

AVR ATmega8
Memories
In-System
Reprogrammable Flash
Program Memory
2486M–AVR–12/03
This section describes the different memories in the ATmega8. The AVR architecture
has two main memory spaces, the Data memory and the Program Memory space. In
addition, the ATmega8 features an EEPROM Memory for data storage. All three mem-
ory spaces are linear and regular.
The ATmega8 contains 8K bytes On-chip In-System Reprogrammable Flash memory
for program storage. Since all AVR instructions are 16- or 32-bits wide, the Flash is
organized as 4K x 16 bits. For software security, the Flash Program memory space is
divided into two sections, Boot Program section and Application Program section.
The Flash memory has an endurance of at least 10,000 write/erase cycles. The
ATmega8 Program Counter (PC) is 12 bits wide, thus addressing the 4K Program mem-
ory locations. The operation of Boot Program section and associated Boot Lock Bits for
software protection are described in detail in “Boot Loader Support – Read-While-Write
Self-Programming” on page 206. “Memory Programming” on page 219 contains a
detailed description on Flash Programming in SPI- or Parallel Programming mode.
Constant tables can be allocated within the entire Program memory address space (see
the LPM – Load Program memory instruction description).
Timing diagrams for instruction fetch and execution are presented in “Instruction Execu-
tion Timing” on page 12.
Figure 7. Program Memory Map
Application Flash Section
Boot Flash Section
$000
$FFF
ATmega8(L)
15