PQ070XZ01 SHARP [Sharp Electrionic Components], PQ070XZ01 Datasheet - Page 21

• Manufacturer Part Number: PQ070XZ01
• Description: DEVICE SPECIFICATION FOR VOLTAGE REGULATOR
• Manufacturer: SHARP [Sharp Electrionic Components]

3nnnr
7.5 For cleaning
(3) Hand soldering
(21 Dip soldering
Lunrunnl
there is the possibility
Even within
the wire in the device package
This device is basically
In case when hand soldering
it is recommended
of soldering
soldering
(3) Applicable
We recommend
(bl Please shaIl not give the mechanical
(1) Solvent
(2) Ultrasonic
Please obey the note items below concerning
(a) After solder dip. please do cooling naturally.
after thorough
In case when the other solvent is used. there are cases that
the packaging
iron edge to leads directly
fu(*
the above conditions
cleaning
iron edge. temperature.
solvent
cleaning
that solder dip should
that only one hand soldering
resin is eroded.
confirmation
that the stress given to the terminals
: Solvent temperature
: Ethyl alcohol.
immersion
designed
: The effect to device by ultrasonic
by cleaning
output,
condition
and confhm
the ultrasonic
cut.
is reluctantly
regarding
for the soldering
In advance,
cleaning
is performed
for 3 min or less
for 10s or less. Please be careful
etc. in order not to give any stress to the leads.
etc. Please test it in actual
Please use the other solven,t
bath size. ultrasonic
that doesn’t occur any defect before starting
be 260% (Bolder temp.)
Methyl
cleaning.
stress or the impact
solder reflow, solder dip or hand soldering
needed for modification
time. PCB size or device mounting
45% or less
solder reflow.
please confirm
alcohol,
in actual
should be done at 260°C or less
such as reflow soldering
Isopropyl
using condition.
by the deformation
cleaning
power
stress to the device.
fully at the actual application.
10s or less and 1 time only.
using condition
alcohol
etc.,
differs
not to touch
i
’
or dip soldering.
of P(X3 makes