EM91240AP EMC [ELAN Microelectronics Corp], EM91240AP Datasheet - Page 5

• Manufacturer Part Number: EM91240AP
• Description: TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
• Manufacturer: EMC [ELAN Microelectronics Corp]

* This specification are subject to be changed without notice.
Repertory memory
Storing of 40 sets memory
Dialing (after memory dialed out, the content of LNB is keeping to current data)
pager, Memory and other system applications.
Storing : EM91240 series support two operating methods to store numbers into SAVE redial memory.
Method 1
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push d1, d2, .. , dn. The numbers d1, d2, .. , dn will be dialed out in Pulse
• After dn had been dialed out and push [ST], Save key. If the keying numbers are more than 32 digits that
Method 2
Dialing :
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out
The EM91240 series incorporated several sets repertory memory and each one can store number up to 16 digits.
In memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored into
specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content of
LNB is keeping to current data.
Indirect (three-touch) operation
Indirect (three-touch) memory
• To select Pulse or Tone mode.
• Off-hook (or Turn on HF function), push A, n , n key. The numbers that are stored in indirect memory
or Tone mode as selection.
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
In the [] key allows to be omitted.
Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, [ST], Save. If the keying numbers are not over 32
digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.
in Pulse or Tone mode as selection.
Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, ST, n, n. The numbers d1, d2, .. , dn will be stored
into memory location “n n”. The “n n” expressed digital number from 01 to 40.
location “n n” will be dialed out in Pulse or Tone mode as selection . The “n n” expressed digital number
from 01 to 40.
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91240 SERIES
10.1.1997
5