MASW-000822-000SMB MA-COM [M/A-COM Technology Solutions, Inc.], MASW-000822-000SMB Datasheet - Page 2

• Manufacturer Part Number: MASW-000822-000SMB
• Description: Application Note on Sample Board Operation of the MASW-000822-12770T T/R Switch
• Manufacturer: MA-COM [M/A-COM Technology Solutions, Inc.]

2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Application Note on Sample Board Operation of the
MASW-000822-12770T T/R Switch
MASW-000822-000SMB
The board was specifically designed for
the new series of high power switches
and therefore is interchangeable. The
component selection and RF ports are
specific to part number and operating
frequency. In figure 3. the component
selection is specific to the MASW-
000822-12770T switch and as shown in
the drawing the RF2 is cut and not
used.
In this case the board is intended to be
biased with a negative & positive sup-
ply. The schematic in Figure 4. shows
the schematic representation of the
board and switch. The intention of this
board was use the TX and RF ports for
the bias paths, however , the device can
be biased as any SPDT switch.
Figure 3. Sample board layout
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
• North America Tel: [phone] • Europe Tel: [phone]
• India Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Figure 4. Sample Board Schematic
• China Tel: [phone]
Rev 1