HMC407MS8GE HITTITE [Hittite Microwave Corporation], HMC407MS8GE Datasheet - Page 5

• Manufacturer Part Number: HMC407MS8GE
• Description: GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 7 GHz
• Manufacturer: HITTITE [Hittite Microwave Corporation]

11 - 32
11
Pin Descriptions
Application Circuit
Pin Number
3, 6, 7
1
2
4
5
8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Function
RFOUT
GND
RFIN
Vcc2
Vcc1
Vpd
Power supply voltage for the fi rst amplifi er stage. An external bypass capacitor
Power control pin. For maximum power, this pin should be connected to 5V. A
higher voltage is not recommended. For lower die current, this voltage can be
capacitor of 330 pF is required. This capacitor should be placed no more than
Ground: Backside of package has exposed metal ground slug that must be
connected to ground thru a short path. Vias under the device are required.
Power supply voltage for the output amplifi er stage. An external bypass
of 330 pF is required as shown in the application schematic.
v03.1006
Order On-line at www.hittite.com
20 mils form package lead.
and matched to 50 Ohms.
and matched to 50 Ohms.
This pin is AC coupled
This pin is AC coupled
Description
reduced.
HMC407MS8G
Note 1: Vcc1 and Vcc2 may be connected to a common Vcc.
Note 2: C2 should be located < 0.020” from Pin 8 (Vcc2).
POWER AMPLIFIER, 5 - 7 GHz
GaAs InGaP HBT MMIC
/
407MS8GE
Interface Schematic