HMC414MS8GE HITTITE [Hittite Microwave Corporation], HMC414MS8GE Datasheet - Page 6

• Manufacturer Part Number: HMC414MS8GE
• Description: GaAs InGaP HBT MMIC POWER AMPLIFIER, 2.2 - 2.8 GHz
• Manufacturer: HITTITE [Hittite Microwave Corporation]

Pin Descriptions
Pin Number
3, 4
6, 8
1
2
5
7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Vpd1, Vpd2
Function
RFOUT
RFIN
GND
Vcc
NC
Ground: Backside of package has exposed metal ground slug that must be
connected to ground thru a short path. Vias under the device are required.
3.6V. For 5V operation, a dropping resistor is required. A higher voltage is
Power control pin. For maximum power, this pin should be connected to
not recommended. For lower idle current, this voltage can be reduced.
capacitor of 330 pF is required as shown in the application schematic.
Power supply voltage for the fi rst amplifi er stage. An external bypass
v04.0607
Order On-line at www.hittite.com
RF output and DC bias for the output stage.
and matched to 50 Ohms.
This pin is AC coupled
Not Connected.
Description
HMC414MS8G
POWER AMPLIFIER, 2.2 - 2.8 GHz
GaAs InGaP HBT MMIC
/
414MS8GE
Interface Schematic
11 - 63
11