FT232HL-TRAY FTDI, FT232HL-TRAY Datasheet - Page 3

• Manufacturer Part Number: FT232HL-TRAY
• Description: usb-to-uart 1-ch 1.8v/3.3v 48-pin lqfp tray...
• Manufacturer: FTDI

Document No.: FT_000288
FT232H SINGLE CHANNEL HI-SPEED USB TO MULTIPURPOSE UART/FIFO IC
Datasheet Version 1.6
Clearance No.: FTDI #199
1.3 USB Compliant
The FT232H is fully compliant with the USB 2.0 specification and has been given the USB-IF Test-ID
(TID) 40770005.
The timing of the rise/fall time of the USB signals is not only dependant on the USB signal drivers, it is
also dependant system and is affected by factors such as PCB layout, external components and any
transient protection present on the USB signals. For USB compliance these may require a slight
adjustment. This timing can be modified through a programmable setting stored in the same external
EEPROM that is used for the USB descriptors. Timing can also be changed by adding appropriate passive
components to the USB signals.
1.4 Applicable Documents
The following application and technical documents can be downloaded by clicking on the appropriate links
below:
AN_108 – Command Processor For MPSSE and MCU Host Bus Emulation Modes
AN_113 – Interfacing FT2232H Hi-Speed Devices To I2C Bus
AN_114 – Interfacing FT2232H Hi-Speed Devices To SPI Bus
AN_129 – Interfacing FT2232H Hi-Speed Devices to a JTAG TAP
AN_135 – MPSSE Basics
AN_167_FT1248 Parallel Serial Interface Basics
Copyright © 2011 Future Technology Devices International Limited
3