DS1267BE-010+ Maxim Integrated, DS1267BE-010+ Datasheet - Page 3

• Manufacturer Part Number: DS1267BE-010+
• Description: Digital Potentiometer ICs Digital Sextet Potentiometer
• Manufacturer: Maxim Integrated

Specifications of DS1267BE-010+

• Resistance: 10 kOhms
• Temperature Coefficient: 750 PPM / C
• Tolerance: 20 %
• Number Of Pots: Dual
• Taps Per Pot: 256
• Digital Interface: 3-Wire
• Description/function: Dual Digital Potentiometer Chip
• Operating Supply Voltage: 4.5 V to 5.5 V
• Supply Current: 5 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: TSSOP-20
• Minimum Operating Temperature: - 40 C
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 4.5 V

DS1267B
DS1267B BLOCK DIAGRAM Figure 1
I/O SHIFT REGISTER Figure 2
Transmission of data always begins with the stack select bit followed by the potentiometer-1 wiper
position value and lastly the potentiometer-0 wiper position value.
When wiper position data is to be written to the DS1267B, 17 bits (or some integer multiple) of data
should always be transmitted. Transactions which do not send a complete 17 bits (or multiple) will leave
the register incomplete and possibly an error in the desired wiper positions.
After a communication transaction has been completed, the
signal input should be taken to a low
RST
state to prevent any inadvertent changes to the device shift register. Once
has reached a low state,
RST
the contents of the I/O shift register are loaded into the respective multiplexers for setting wiper position.
A new wiper position will only engage after a
transition to the inactive state. On device power-up
RST
the DS1267B wiper positions will be set at 50% of the total resistance or binary value 1000 0000.
Maxim Integrated ............................................................................................................................................................................................. 3