AP-S25P6B064G-CTW Apacer, AP-S25P6B064G-CTW Datasheet - Page 10

• Manufacturer Part Number: AP-S25P6B064G-CTW
• Description: Solid State Drives - SSD SAFD 25P SATA FLASH DRIVE SLC 64GB EXT
• Manufacturer: Apacer

Specifications of AP-S25P6B064G-CTW

• Rohs: yes
• Product: SATA Flash Drives
• Memory Size: 64 GB
• Sustained Read: 265 MB/s
• Sustained Write: 230 MB/s
• Active Mode Current: 789 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Connector Type: 7-pin signal, 15-pin power
• Dimensions: 100 mm x 69.9 mm
• Minimum Operating Temperature: - 40 C

Serial ATA Flash Drive
APS25P6Bxxxx- CXx
2.2
S.M.A.R.T.
S.M.A.R.T. is an acronym for Self-Monitoring, Analysis and Reporting Technology, an open standard allowing
disk drives to automatically monitor their own health and report potential problems. It protects the user from
unscheduled downtime by monitoring and storing critical drive performance and calibration parameters. Ideally,
this should allow taking proactive actions to prevent impending drive failure.
Apacer SAFD 25P uses the standard SMART command B0h to read data from the drive for SMART feature
as the SATA Rev.2.6 ATA/ATAPI-7 specifications. Based on the SFF-8035i Rev. 2.0 specifications, Apacer
SMART defines 3 vendor-specified SMART Attribute IDs (E5h, EAh-EBh, and E8h) in SAFD 25P. They
represent Flash ID, maximum erase count, average erase count, good block count, free-list block count, and
firmware version information. When the Apacer SMART Utility running on the host, it analyzes and reports the
disk status to the host before SAFD 25P is in critical condition.
9
© 2011 Apacer Technology Inc.
Rev. 1.5