AP-S25P6B064G-CTW Apacer, AP-S25P6B064G-CTW Datasheet - Page 13

• Manufacturer Part Number: AP-S25P6B064G-CTW
• Description: Solid State Drives - SSD SAFD 25P SATA FLASH DRIVE SLC 64GB EXT
• Manufacturer: Apacer

Specifications of AP-S25P6B064G-CTW

• Rohs: yes
• Product: SATA Flash Drives
• Memory Size: 64 GB
• Sustained Read: 265 MB/s
• Sustained Write: 230 MB/s
• Active Mode Current: 789 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Connector Type: 7-pin signal, 15-pin power
• Dimensions: 100 mm x 69.9 mm
• Minimum Operating Temperature: - 40 C

4. Environmental Specifications
4.1
SAFD 25P environmental specifications follow the US Military Standard MIL-STD-810F, as shown in Table 4-1.
4.2
Mean Time Between Failures (MTBF) is predicted based on reliability data for the individual components in
SAFD drive. Although many component MTBFs are given in databases and often these values are not really
accurate, the prediction result for SAFD 25P is more than 2,000,000 hours.
Notes about the MTBF:
The MTBF is predicated and calculated based on “Telcordia Technologies Special Report, SR-332, Issue 2”
method.
4.3
SAFD 25P drive complies with the following standards:
© 2011 Apacer Technology Inc.
*Extended Temperature
Environment
Temperature
Humidity
Vibration
Shock - Operating
Altitude
Environments
Mean Time Between Failures (MTBF)
Certification and Compliance
CE – EN55022/55024
FCC 47CFR Part15 Class B
RoHS
MIL-STD-810F
SATA II (SATA Rev. 2.5)
Up to ATA/ATAPI-7 ( including S.M.A.R.T.)
Table 4-1 SAFD 25P environmental specifications
0°C to 70°C (Operating – Standard); -40°C to 85°C (Operating – ET*)
Serial ATA Flash Drive
APS25P6Bxxxx- CXx
Random: 10-2000 Hz, 16.3 G (X, Y, Z)
5% to 95% RH (Non-condensing)
Peak acceleration: 50 G, 11 ms
-40°C to 100°C (Non-operating)
Sine wave: 5~55~5 Hz (X, Y, Z)
Acceleration: 1,500 G, 0.5 ms
12
Specification
80,000 ft
Rev. 1.5