AT27C080-90PU Atmel, AT27C080-90PU Datasheet - Page 9

• Manufacturer Part Number: AT27C080-90PU
• Description: IC OTP 8MBIT 90NS 32DIP
• Manufacturer: Atmel

Specifications of AT27C080-90PU

• Format - Memory: EPROMs
• Memory Type: OTP EPROM
• Memory Size: 8M (1M x 8)
• Speed: 90ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-DIP (0.600", 15.24mm)
• Capacitance, Input: 4 pF
• Capacitance, Output: 8 pF
• Current, Input, Leakage: ±1 μA (Read)
• Current, Operating: 40 mA (Read)
• Current, Output, Leakage: ±5 μA (Read)
• Density: 8M
• Organization: 1M×8
• Package Type: PDIP
• Temperature, Operating: -40 to +85 °C
• Time, Access: 90 ns
• Time, Address Setup: 2
• Time, Fall: 20 ns
• Time, Rise: 20 ns
• Voltage, Esd: 2000 V
• Voltage, Input, High: 5.5 V (Read)
• Voltage, Input, Low: 0.8 V (Read)
• Voltage, Output, High: 2.4 V (Read)
• Voltage, Output, Low: 0.4 V (Read)
• Voltage, Supply: 5 V
• Access Time: 90ns
• Supply Voltage Range: 4.5V To 5.5V
• No. Of Pins: 32
• Operating Temperature Range: -40°C To +85°C
• Ic Interface Type: Parallel
• Supply Voltage Max: 5.5V
• Rohs Compliant: Yes
• Operating Temperature Max: 85°C
• Memory Configuration: 1M X 8
• Memory Case Style: DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18. Rapid Programming Algorithm
0360L–EPROM–12/07
A 50 µs CE pulse width is used to program. The address is set to the first location. V
raised to 6.5V and OE/V
50 µs CE pulse without verification. Then a verification reprogramming loop is executed for
each address. In the event a byte fails to pass verification, up to 10 successive 50 µs pulses
are applied with a verification after each pulse. If the byte fails to verify after 10 pulses have
been applied, the part is considered failed. After the byte verifies properly, the next address is
selected until all have been checked. OE/V
are read again and compared with the original data to determine if the device passes or fails.
PP
is raised to 13.0V. Each address is first programmed with one
PP
is then lowered to V
IL
and V
CC
AT27C080
to 5.0V. All bytes
CC
is
9