UMFT12XEV FTDI, UMFT12XEV Datasheet - Page 11

no-image

UMFT12XEV

Manufacturer Part Number
UMFT12XEV
Description
Interface Development Tools MAIN BOARD FOR EVAL FT120, FT121, FT122
Manufacturer
FTDI
Type
USB Controllersr
Datasheet

Specifications of UMFT12XEV

Rohs
yes
Product
Evaluation Boards
Tool Is For Evaluation Of
FT120, FT121, FT122
Interface Type
SPI, UART
Operating Supply Voltage
5 V
Description/function
Main board for evaluating FT120, FT121 and FT122 add-on modules
Figure 4-2 JP2 default setting
Figure 4-3 JP3 and JP4 default setting
4.3
The LPC1114 on the UMFT12XEV board is pre-loaded with firmware supporting Communication Device
Class (CDC class). The major OSs support the CDC protocol on their USB stack to use serial port
communication, allowing PC’s to access the CDC device through a virtual COM port (VCP) without
developing a new driver.
Linux recognize the CDC device as /dev/ttyACM# (# denotes a number). The driver is loaded
automatically when the device is connected.
Mac OS recognize the CDC device as /dev/cu.usbmodem# (# denotes a number). The driver is loaded
automatically when the device is connected.
Windows has a CDC protocol driver (usbser.sys) to generate VCP. However, it requires a “Setting
Information (INF)” file at the first connection. The required INF file can be download from FTDI website
http://www.ftdichip.com/Products/Modules/DevelopmentModules.htm.
Here is an example of driver installation under Windows 7 32-bit system:
Connect the daughter card USB connector to the test PC with the micro-USB-B to Standard-A cable
On Windows 7 PC, open control panel->device manager
Install the driver
Copyright © 2012 Future Technology Devices International Limited
Document Reference No.: FT_000728
FT12 Series Evaluation Kit Datasheet
Clearance No.: FTDI#
Version
11
314
1.0

Related parts for UMFT12XEV