WizFi220-EVB WIZnet, WizFi220-EVB Datasheet - Page 38

• Manufacturer Part Number: WizFi220-EVB
• Description: WiFi / 802.11 Development Tools EVALUATION BOARD FOR WIZFI220
• Manufacturer: WIZnet

Specifications of WizFi220-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WizFi220
• Protocol Supported: 802.11 b/g/n
• Frequency: 2.4 GHz
• Interface Type: I2C, SPI, UART
• Operating Supply Voltage: 3.3 V
• Antenna Connector Type: U.FL
• Modulation Technique: CCK, DSSS

ATC
ATA
ATA2
ATO
AT+XAR=
Command
AT+WEBPROV
=
AT+WEBLOGO
ADD=
Command
AT+FWUP=
AT+SETTIME=
AT+
GETTIME=?
AT+DGPIO=
WizFi 210 User Manual
(12) Provisioning
(13) Miscellaneous
n=0 (disable) =1 (enable)
n=0 (disable)
Parameters
<user name>,<passwd>
<size> maximum size is 1788
bytes
Parameters
<SrvIp>,<SrvPort>,<SrcPort>,[<ret
ry>]
<dd/mm/yyyy>,<HH:MM:SS>
<GPIO-NO>,<SET/RESET(0/1)>
5 to 3600 (interval, seconds)
(WIZnet Co., Ltd.)
Table 25. Auto connection
Table 26. Provisioning
Ex) AT+NAUTO=0,1,192.168.3.101,5000
(TCP/Client)
IF 1, Auto Connect is enabled on next reboot
or AT.
Start Auto Connect, including association.
Start Auto Connect using existing association.
Return to a previous Auto Connect session;
returns an error if no such session exists.
Auto reconnect interval.
Ex) AT+XAR=0, AT+XAR=10
Responses / Effects
Provisioning through web pages
Adding the Logo that will appear on the web
pages used for provisioning.
Responses / Effects
Get a firmware upgrade from the server
address/port to the adapter port SrcPort.
Ex) AT+FWUP=192.168.3.200,667,667
Set the adaptor system time
Upon reception of this command the adaptor
sends the current system time in milliseconds
since
epoch(1970) to the serial interface. The time
format comes on the serial interface as
follows:
“Current Time in msec since epoch=xxxxxxx”
Set or reset (high/low) a GPIO pin
Ex) AT+DGPIO=31,0
AT+NAUTO=1,1, ,5001 (TCP/Server)
AT+NAUTO=0,0,192.168.3.101,5002
(UDP, Local/Remote Port is 5002)
32