WIZ630wi-EVB WIZnet, WIZ630wi-EVB Datasheet - Page 14

no-image

WIZ630wi-EVB

Manufacturer Part Number
WIZ630wi-EVB
Description
WiFi / 802.11 Development Tools Evaluation Board for WIZ630wi
Manufacturer
WIZnet
Datasheet

Specifications of WIZ630wi-EVB

Rohs
yes
Product
Evaluation Boards
Tool Is For Evaluation Of
WIZ630
Protocol Supported
802.11 n
Frequency
2.4 GHz
Interface Type
RS-232
3.1
3.1 Access Point
In this mode, all Ethernet ports and wireless interface are bridged together. Wired/Wireless interface has
the same IP address space with its top mesh. DHCP Server function is disabled and WIZ630wi does not
assign an IP. Wireless (LAN Port included) sending periodic Broadcast Packet to Station and maintains a
connection with Station.
3.2 Gateway (Router)
3.2
Operate in router mode. Interfaces are separated into WAN I/F (Top Internet Business Network), LAN I/F
(Sub Private Network: 192.168.16.xxx), Wireless I/F (Sub Private Network: 192.168.16.xxx). Port # 0 will
be assigned to the WAN Port. WIZ630wi periodically sends Broadcast Packet to Sub-LAN (LAN Port
included) and maintains connection with Station.
3.3 Client (Station)
3.3
Wireless I/F is assigned as WAN Port and all Ethernet Ports are bound to LAN Port. Set the profile and the
WIZ630wi is automatically connected to the AP when re-booting in the future. Devices that are connected
through the LAN port are assigned a private IP. WIZ630wi periodically sends PING Packet to AP Gateway
and maintains connection with AP.
3.4
3.4 AP
Wireless I/F is assigned as WAN Port and all Ethernet Ports are bound to LAN Port. This mode is similar to
Station mode, however the difference is that the Wireless I/F will operate as client with AP simultaneously.
WIZ630wi periodically sends Broadcast Packet to Sub-LAN (LAN Port included) and maintains connection
with Station.
3.5 a a a a d d d d - - - - h h h h oc
3.5
This mode is similar to Gateway mode. The Wireless I/F operates as ad-hoc and connects to Station Point-
3.1
3.1
3.2
3.2
3.3
3.3
3.4
3.4
3.5
3.5
3. 3. 3. 3. Operation mode
User can select the operation mode.
The default setting of WIZ630wi is AP Mode. (DHCP Server Enabled)
Operation mode
Operation mode
Operation mode
Access Point
Access Point (Bridge)
Gateway (Router)
Gateway (Router)
Client (Station)
Client (Station)
AP
AP
AP- - - - Client
Access Point
Gateway (Router)
Client (Station)
Client
Client mode
Client
oc mode
oc oc
mode
mode
mode
mode
mode
mode
(Bridge)
(Bridge)
(Bridge)
14

Related parts for WIZ630wi-EVB