IDT71T75702S85PFG IDT, Integrated Device Technology Inc, IDT71T75702S85PFG Datasheet - Page 22

• Manufacturer Part Number: IDT71T75702S85PFG
• Description: IC SRAM 18MBIT 85NS 100TQFP
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT71T75702S85PFG

• Format - Memory: RAM
• Memory Type: SRAM - Synchronous ZBT
• Memory Size: 18M (512K x 36)
• Speed: 85ns
• Interface: Parallel
• Voltage - Supply: 2.375 V ~ 2.625 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 71T75702S85PFG

NOTES:
1. Device outputs = All device outputs except TDO.
2. Device inputs = All device inputs except TDI, TMS, and TRST.
EXTEST
SAMPLE/PRELOAD
DEVICE_ID
HIGHZ
RESERVED
RESERVED
RESERVED
RESERVED
CLAMP
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
BYPASS
VALIDATE
Revision Number (31:28)
IDT Device ID (27:12)
IDT JEDEC ID (11:1)
ID Register Indicator Bit (Bit 0)
IDT71T75702, IDT71T75902, 512K x 36, 1M x 18, 2.5V Synchronous ZBT™ SRAMs with
2.5V I/O, Burst Counter and Flow-Through Outputs
Instruction Field
Instruction
Forces contents of the boundary scan cells onto the device outputs
Places the boundary scan register (BSR) between TDI and TDO.
Places the boundary scan register (BSR) between TDI and TDO.
SAMPLE allows data from device inputs
in the boundary scan cells and shifted serially through TDO. PRELOAD
allows data to be input serially into the boundary scan cells via the TDI.
Loads the JTAG ID register (JIDR) with the vendor ID code and places
Places the bypass register (BYR) between TDI and TDO. Forces all
device o utput drivers to a High-Z state.
Several combinations are reserved. Do not use codes other than those
identified for EXTEST, SAMPLE/PRELOAD, DEVICE_ID, HIGHZ, CLAMP,
Uses BYR. Forces contents of the boundary scan cells onto the device
outputs. Places the byp ass registe r (BYR) between TDI and TDO.
Same as above.
controller passes through the CAPTURE-IR state. The lower two bits '01'
are mand ated by the IEEE std. 1149.1 specification.
Same as above.
as a single bit in length.
the register between TDI and TDO.
VALIDATE and BYPASS instructions.
Automatically loaded into the instruction register whenever the TAP
The BYPASS instruction is used to truncate the boundary scan register
0x221, 0x223
Value
0x33
0x2
1
6.42
22
Reserved for version number.
Define s IDT part number 71T75702 and 71T75902, respectively.
Indicates the presence of an ID register.
Allows unique identification of device vendor as IDT.
Description
(2)
and outputs
Commercial and Industrial Temperature Ranges
(1)
to be captured
Description
(1)
.
OPCODE
0000
0010
0100
0001
0101
0110
1000
1010
1100
0011
0111
1001
1011
1101
1110
1111
I5319 tbl 02
I5319tbl 04