MAX7306AUB+ Maxim Integrated Products, MAX7306AUB+ Datasheet - Page 12

• Manufacturer Part Number: MAX7306AUB+
• Description: IC LED DRIVER LINEAR 10-UMAX
• Manufacturer: Maxim Integrated Products
• Type: Linear (I²C Interface)r

Specifications of MAX7306AUB+

• Topology: PWM
• Number Of Outputs: 4
• Internal Driver: Yes
• Type - Primary: Backlight, LED Blinker
• Type - Secondary: White LED
• Frequency: 1MHz
• Voltage - Supply: 1.62 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 10-MSOP Exposed Pad, 10-HMSOP, 10-eMSOP
• Operating Temperature: -40°C ~ 125°C
• Current - Output / Channel: 25mA
• Internal Switch(s): No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Efficiency: -
• Lead Free Status / Rohs Status: Details

The MAX7307 features a port supply, V
the logic supplies to all push-pull I/O ports. P2 through
P4 can be configured as push-pull I/O ports (see Figure
3). V
ing the logic-high port load current. V
translation capability for the outputs and operates over a
1.40V to 5.5V voltage independent of the power-supply
voltage, V
Each port of the MAX7307 set as an input can be config-
ured to switch midrail of either the V
supplies. Whenever the port supply reference is
changed from V
register to clear any transition flag on the port.
SMBus/I
GPIOs and LED Drivers
Figure 2. Output Port Structure
Figure 3. Port I/O Structure
12
LA
______________________________________________________________________________________
powers the logic-high port output voltage sourc-
Port Supplies and Level Translation
DD
.
CLOCK
DD
OUTPUT
SELECT
2
INPUT
to V
C Interfaced 4-Port, Level-Translating
LA
, or vice versa, read the port
V
DD
3-BIT PRESCALER
P1
CONFIG26 [4:2]
MAX7307 ONLY
DD
LA
LA
or the V
, that provides
provides level
LA
port
PORT P1
4-BIT BLINK
5-BIT PWM
PORT_[4:0]
PORT_[3:0]
Ports P2 through P4 are overvoltage protected to V
This is true even for a port used as an input with a V
port logic-input threshold. Port P1 is overvoltage pro-
tected to 5.5V, independent of V
3). To mix logic outputs with more than one voltage
swing on a group of ports using the same port supply,
set the port supply voltage (V
put voltage. Use push-pull outputs and port P1 for the
highest voltage ports, and use open-drain outputs with
external pullup resistors for the lower voltage ports. For
the MAX7307, when P2, P3, and P4 ports are acting as
an input referenced to V
is greater than V
PORT_[5]
OUTPUT
SELECT
INPUT
V
DD
P2, P3, P4
DD
0
1
- 0.3V.
V
LA
DD,
MAX7307 ONLY
make sure the V
LA
DD
) to be the highest out-
I/O
and V
PORTS P2
THROUGH P4
LA
(see Figure
LA
voltage
LA
DD
.