AMIS30623C623AG ON Semiconductor, AMIS30623C623AG Datasheet - Page 50

• Manufacturer Part Number: AMIS30623C623AG
• Description: IC MOTOR DVR MICROSTP LIN 32NQFP
• Manufacturer: ON Semiconductor
• Type: Stepper Motor Driverr

Specifications of AMIS30623C623AG

• Applications: Stepper Motor Driver
• Number Of Outputs: 1
• Current - Output: 800mA
• Voltage - Supply: 6.5 V ~ 29 V
• Operating Temperature: -40°C ~ 165°C
• Mounting Type: Surface Mount
• Package / Case: 32-VSQFP
• Product: Stepper Motor Controllers / Drivers
• Operating Supply Voltage: 5 V
• Supply Current: 10 mA
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Load: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

GetStatus
to get a quick status (compared to that of GetFullStatus
command) of the circuit and of the stepper−motor. Refer to
Flags Table to see the meaning of the parameters sent to the
LIN master.
GetStatus corresponds to a 2 data bytes LIN in−frame response with a direct ID (type #5).
Where:
as there are stepper−motors connected to the LIN bus.
GotoSecurePosition
of the stepper−motors to move to the secure position
<SecPos[10:0]>. It can also be internally triggered if
the LIN bus communication is lost, after an initialization
phase, or prior to going into sleep mode. See the priority
encoder description for more details. The priority encoder
Table 52. GetOTPparam READING FRAME TYPE #6
Table 53. GetStatus READING FRAME TYPE #5
This command is provided to the circuit by the LIN master
(*) According to parity computation
ID[5:0]: Dynamically allocated direct identifier. There should be as many dedicated identifiers to this GetStatus command
This command is provided by the LIN master to one or all
Byte
Byte
0
1
2
3
4
5
6
7
8
9
0
1
2
3
Checksum
Checksum
Content
Identifier
Content
Identifier
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
Data 7
Data 8
Data 1
Data 2
VddReset
ESW
Bit 7
Bit 7
0
*
StepLoss
Bit 6
Bit 6
1
*
http://onsemi.com
ElDef
Bit 5
Bit 5
1
0
50
Note: A GetStatus command will attempt to reset flags
<TW>, <TSD>, <UV2>, <ElDef>, <StepLoss> and
<VddReset>.
table
GotoSecurePosition command will be ignored.
Note: The dynamic ID allocation has to be assigned to
‘General Purpose 2 Data bytes’ ROM pointer, i.e. ‘0000’.
The command is decoded only from the command data.
Checksum over data
Checksum over data
Bit 4
Bit 4
UV2
OTP byte @0x00
OTP byte @0x01
OTP byte @0x02
OTP byte @0x03
OTP byte @0x04
OTP byte @0x05
OTP byte @0x06
OTP byte @0x07
ID4
1
Structure
Structure
also
AD[6:0]
Bit 3
Bit 3
TSD
ID3
acknowledges
1
Bit 2
Bit 2
ID2
TW
1
the
Bit 1
Bit 1
ID1
cases
0
Tinfo[1:0]
where
Bit 0
Bit 0
ID0
1
a