HCPL-2503#020 Avago Technologies US Inc., HCPL-2503#020 Datasheet - Page 5

• Manufacturer Part Number: HCPL-2503#020
• Description: OPTOCOUPLER 1MBS UL 8-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of HCPL-2503#020

• Input Type: DC
• Package / Case: 8-DIP (0.300", 7.62mm)
• Voltage - Isolation: 5000Vrms
• Number Of Channels: 1, Unidirectional
• Current - Output / Channel: 8mA
• Data Rate: 250kbps
• Propagation Delay High - Low @ If: 1µs @ 8mA
• Current - Dc Forward (if): 25mA
• Output Type: Open Collector
• Mounting Type: Through Hole
• Isolation Voltage: 5000 Vrms
• Output Device: Phototransistor
• Configuration: 1 Channel
• Current Transfer Ratio: 22 %
• Maximum Baud Rate: 1 MBps
• Maximum Forward Diode Voltage: 1.7 V
• Maximum Reverse Diode Voltage: 5 V
• Maximum Input Diode Current: 25 mA
• Maximum Power Dissipation: 100 mW
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
Regulatory Information
The devices contained in this data sheet have been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324.
Insulation and Safety Related Specifications
Parameter
Minimum External
Air Gap (External
Clearance)
Minimum External
Tracking (External
Creepage)
Minimum Internal
Plastic Gap
(Internal Clearance)
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
Symbol
L(101)
L(102)
CTI
8-Pin DIP
(300 Mil)
Value
0.08
200
NA
7.1
7.4
IIIa
Value
0.08
SO-8
200
NA
4.9
4.8
IIIa
IEC/EN/DIN EN 60747-5-2
Approved under
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
(HCNW and Option 060 only)
Widebody
(400 Mil)
Value
10.0
200
9.6
1.0
4.0
IIIa
Volts
Units
mm
mm
mm
mm
Conditions
Measured from input terminals
to output terminals, shortest
distance through air.
Measured from input terminals
to output terminals, shortest
distance path along body.
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Measured from input terminals
to output terminals, along
internal cavity.
DIN IEC 112/VDE 0303 Part 1
Material Group
(DIN VDE 0110, 1/89, Table 1)