OPTOCOUPLER TRANSMITTR 20MA 8DIP

HCPL-4100-000E

Manufacturer Part NumberHCPL-4100-000E
DescriptionOPTOCOUPLER TRANSMITTR 20MA 8DIP
ManufacturerAvago Technologies US Inc.
TypeTransmitter
HCPL-4100-000E datasheet
 

Specifications of HCPL-4100-000E

Package / Case8-DIP (0.300", 7.62mm)Voltage - Isolation3750Vrms
Input TypeDCVoltage - Supply4.5 V ~ 20 V
Operating Temperature0°C ~ 70°CMounting TypeThrough Hole
Logic Gate TypeInverterMaximum Baud Rate0.02 MBd
Configuration1 ChannelIsolation Voltage3750 Vrms
Output TypeOpen CollectorMaximum Propagation Delay Time1600 ns
Maximum Forward Diode Current7 mAMaximum Continuous Output Current30 mA
Maximum Power Dissipation360 mWMaximum Operating Temperature+ 70 C
Minimum Operating Temperature0 CNo. Of Channels1
Optocoupler Output TypeTransistorInput Current250µA
Output Voltage27VOpto Case StyleDIP
No. Of Pins8Data Rate Max24Kbps
Rohs CompliantYesLead Free Status / RoHS StatusLead free / RoHS Compliant
Other names516-1546-5  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
Page 1/12

Download datasheet (442Kb)Embed
Next
HCPL-4100
Optically Coupled 20 mA Current Loop Transmitter
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-4100 optocoupler is designed to operate as a
transmitter in equipment using the 20 mA current loop.
20 mA current loop systems conventionally signal a
logic high state by transmitting 20 mA of loop current
(MARK), and signal a logic low state by allowing no
more than a few milliamperes of loop current (SPACE).
Optical coupling of the signal from the logic input to the
20 mA current loop breaks ground loops and provides
very high immunity to common mode interference.
The HCPL-4100 data input is compatible with
LSTTL, TTL, or CMOS logic gates. The input integrated
circuit drives a GaAsP LED. The light emitted by the LED is
sensed by a second integrated circuit that allows 20 mA
to pass with a voltage drop of less than 2.7 volts when
no light is emitted and allows less than 2 mA to pass
when light is emitted. The transmitter output is capable
of withstanding 27 volts. The input integrated circuit
provides a controlled amount of LED drive current and
takes into account any LED light output degradation. The
internal shield allows a guaranteed 1000 V/μs common
mode transient immunity.
Functional Diagram
A 0.1 μF bypass capacitor connected between pins 8 and 5 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Features
x Guaranteed 20 mA loop parameters
x Data input compatible with LSTTL, TTL and CMOS
Logic
x Internal shield for High Common Mode rejection
x 20 kBaud data rate at 400 metres line length
x Guaranteed On and Off output current levels
x Safety approval
UL Recognized -3750 V rms for 1 minute
CSA Approved
x Optically coupled 20 mA current loop receiver,
HCPL-4200, also available
Applications
x Isolated 20 mA current loop transmitter in:
Computer peripherals
Industrial control equipment
Data communications equipment

HCPL-4100-000E Summary of contents

  • Page 1

    ... RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description The HCPL-4100 optocoupler is designed to operate as a transmitter in equipment using the 20 mA current loop current loop systems conventionally signal a logic high state by transmitting loop current (MARK), and signal a logic low state by allowing no more than a few milliamperes of loop current (SPACE) ...

  • Page 2

    ... To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-4100-500E to order product of Gull Wing Surface Mount package in Tape and Reel packaging in RoHS compliant. Example 2: HCPL-4100 to order product of 300 mil DIP package in tube packaging and non-RoHS compliant. ...

  • Page 3

    ... DIP Package with Gull Wing Surface Mount Option 300 (HCPL-4100) 9.65 ± 0.25 (0.380 ± 0.010 1.19 (0.047) MAX. 1.080 ± 0.320 (0.043 ± 0.013) 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. ...

  • Page 4

    ... CTI 200 Volts DIN IEC 112/VDE 0303 PART 1 IIIa Material Group (DIN VDE 0110, 1/89, Table 1) Regulatory Information The HCPL-4100 has been approved by the following organizations: UL Recognized under UL 1577, Com- ponent Recognition Program, File E55361. CSA Approved under CSA Component Acceptance Notice #5, File CA 88324 ...

  • Page 5

    Absolute Maximum Ratings (No Derating Required up to 55°C) Storage Temperature .............................................................................................-55°C to +125°C Operating Temperature ..........................................................................................-40°C to +85°C Lead Solder Temperature .............................. 260°C for 10 s (1.6 mm below seating plane) Supply Voltage – V .......................................................................................................... ...

  • Page 6

    Switching Specifications For 0°C ≤ T ≤ 70°C, 4.5 V ≤ V ≤ all typicals Parameter Symbol Propagation Delay Time to Logic High Output Level Propagation Delay Time to Logic Low Output Level Propagation ...

  • Page 7

    ... Derate linearly above a free-air temperature of 70° rate of 2.3 mW/ °C. A significant amount of power may be dissipated in the HCPL-4100 output circuit during the transition from the SPACE state to the MARK state when driving a data line or capacitive load (C ...

  • Page 8

    Figure 6. Test Circuit for and t . PLH PHL 1000 0 ...

  • Page 9

    ... A recommended non-isolated active receiver circuit which can be used with the HCPL-4100 in point-to-point or in multidrop 20 mA current loop applications is given in Figure 13. This non-isolated active receiver current threshold must be chosen properly in order to provide adequate noise immunity as well as not to detect SPACE state current (bias current) of the HCPL-4100 transmitter ...

  • Page 10

    ... Figure 13. Recommended Non-Isolated Active Receiver with HCPL-4100 Isolated Transmitter for Simplex Point to Point 20 mA Current Loop. 25% distortion data rate at different V tion data rate is defined as that rate at which 25% distortion occurs to output bit interval with respect to the input bit interval. Maximum data rate (dotted line) is restricted by device character is tics ...

  • Page 11

    ... Voltage compliance of the current source must adequate level for operating all units in the loop while not exceeding 27 V dc, the maximum breakdown voltage for the HCPL-4100. Note that the HCPL-4100 transmitter will allow output loop current to conduct when input V power is off. Consult the HCPL-4200 receiver optocoupler data sheet for specified device performance ...

  • Page 12

    Figure 17. Half Duplex Current Loop System Configurations for (a) Point to Point, (b) Multidrop. For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago ...