HCPL-4100-000E Avago Technologies US Inc., HCPL-4100-000E Datasheet - Page 4

• Manufacturer Part Number: HCPL-4100-000E
• Description: OPTOCOUPLER TRANSMITTR 20MA 8DIP
• Manufacturer: Avago Technologies US Inc.
• Type: Transmitterr

Specifications of HCPL-4100-000E

• Package / Case: 8-DIP (0.300", 7.62mm)
• Voltage - Isolation: 3750Vrms
• Input Type: DC
• Voltage - Supply: 4.5 V ~ 20 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Logic Gate Type: Inverter
• Maximum Baud Rate: 0.02 MBd
• Configuration: 1 Channel
• Isolation Voltage: 3750 Vrms
• Output Type: Open Collector
• Maximum Propagation Delay Time: 1600 ns
• Maximum Forward Diode Current: 7 mA
• Maximum Continuous Output Current: 30 mA
• Maximum Power Dissipation: 360 mW
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• No. Of Channels: 1
• Optocoupler Output Type: Transistor
• Input Current: 250µA
• Output Voltage: 27V
• Opto Case Style: DIP
• No. Of Pins: 8
• Data Rate Max: 24Kbps
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1546-5

Recommended Pb-Free IR Profile
Insulation and Safety Related Specifications
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
Figure 2. Pb-Free IR Profile.
4
Parameter
Min. External Air Gap
(External Clearance)
Min. External Tracking Path
(External Creepage)
Min. Internal Plastic Gap
(Internal Clearance)
Tracking Resistance
(Comparative Tracking Index)
Isolation Group
Note: Non-halide flux should be used.
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
T
T
T
smax
smax
smin
T
T
25
p
L
= 200 °C, T
150 - 200 °C
217 °C
t 25 °C to PEAK
3 °C/SEC. MAX.
60 to 180 SEC.
smin
PREHEAT
RAMP-UP
= 150 °C
t
s
260 +0/-5 °C
TIME
t
t
L
p
Symbol
L(IO1)
L(IO2)
CTI
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
60 to 150 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
Value
0.08
200
7.1
7.4
IIIa
Units
Volts
mm
mm
mm
Conditions
Measured from input terminals to output
terminals, shortest distance through air
Measured from input terminals to output
terminals, shortest distance path along body
Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity
DIN IEC 112/VDE 0303 PART 1
Material Group (DIN VDE 0110, 1/89, Table 1)
Regulatory Information
The HCPL-4100 has been approved
by the following organizations:
UL
Recognized under UL 1577, Com-
ponent Recognition Program, File
E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA
88324.