HCPL-J314-000E Avago Technologies US Inc., HCPL-J314-000E Datasheet - Page 4

• Manufacturer Part Number: HCPL-J314-000E
• Description: OPTOCOUPLER 1CH 0.6A 8-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of HCPL-J314-000E

• Voltage - Isolation: 3750Vrms
• Number Of Channels: 1, Unidirectional
• Current - Output / Channel: 600mA
• Propagation Delay High - Low @ If: 300ns @ 8mA
• Current - Dc Forward (if): 25mA
• Input Type: DC
• Output Type: Push-Pull, Totem-Pole
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• No. Of Channels: 1
• Optocoupler Output Type: Gate Drive
• Input Current: 12mA
• Output Voltage: 30V
• Opto Case Style: DIP
• No. Of Pins: 8
• Peak Reflow Compatible (260 C): Yes
• Isolation Voltage: 3.75kV
• Number Of Elements: 1
• Forward Voltage: 1.8V
• Forward Current: 25mA
• Package Type: PDIP
• Operating Temp Range: -40C to 100C
• Power Dissipation: 260mW
• Propagation Delay Time: 700ns
• Pin Count: 8
• Mounting: Through Hole
• Reverse Breakdown Voltage: 3V
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

TEMPERATURE
ROOM
Solder Reflow Temperature Profile
Recommended Pb-Free IR Profile
4
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
T
T
T
smax
smax
smin
300
200
100
T
T
25
0
p
L
= 200 °C, T
0
Note: Non-halide flux should be used.
Note: Non-halide flux should be used.
150 - 200 °C
217 °C
PREHEATING RATE 3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC.
160°C
150°C
140°C
t 25 °C to PEAK
3 °C/SEC. MAX.
60 to 180 SEC.
smin
PREHEAT
RAMP-UP
= 150 °C
t
50
s
260 +0/-5 °C
3°C + 1°C/–0.5°C
150°C, 90 + 30 SEC.
PREHEATING TIME
TIME
2.5°C ± 0.5°C/SEC.
100
t
t
L
TIME (SECONDS)
p
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
60 to 150 SEC.
TEMP.
PEAK
245°C
RAMP-DOWN
6 °C/SEC. MAX.
150
SEC.
SEC.
30
30
50 SEC.
SOLDERING
200°C
TIME
200
PEAK
TEMP.
240°C
TIGHT
TYPICAL
LOOSE
TEMP.
PEAK
230°C
250
Regulatory Information
The HCPL-J314 has been approved
by the following organizations:
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
UL
Approval under UL 1577, compo-
nent recognition program up to
V
CSA
Approved under CSA Component
Acceptance Notice #5, File CA
88324.
ISO
= 3750 Vrms. File E55361.