LED SUPR RED CLR 1208 RT ANG SMD

LTST-S320KRKT

Manufacturer Part NumberLTST-S320KRKT
DescriptionLED SUPR RED CLR 1208 RT ANG SMD
ManufacturerLite-On Electronics
TypeUni-Color
LTST-S320KRKT datasheet
 


Specifications of LTST-S320KRKT

Led Size3 mm x 1 mmIllumination ColorRed
Lens Color/styleWater ClearOperating Voltage2 V
Wavelength639 nmLuminous Intensity54 mcd
Mounting StyleSMD/SMTOperating Current10 mA
Package / Case1208 (3020 Metric)Viewing Angle130°
ColorRedMillicandela Rating54mcd
Current - Test20mAWavelength - Dominant631nm
Wavelength - Peak639nmVoltage - Forward (vf) Typ2V
Lens TypeClearLens Style/sizeRectangle, 2mm x 1mm
Size / Dimension3.00mm L x 1.00mm WHeight2.00mm
Mounting TypeSurface Mount, Right AngleResistance Tolerance631nm
Package TypeChip LedEmitting ColorRed
Test Current (it)20mAForward Current30mA
Dominant Wave Length631nmForward Voltage2.4V
Product Length (mm)3mmProduct Height (mm)2mm
Product Depth (mm)1mmMountingSurface Mount
Peak Wavelength639nmShape TypeRectangular
Chip MaterialAlGaInPMain CategoryChip LED
Number Of Elements1Pin Count2
Operating Temperature ClassificationIndustrialOperating Temp Range-55C to 85C
Reverse Voltage5VPower Dissipation75mW
Lens Dimensions2x1x1mmLead Free Status / RoHS StatusLead free / RoHS Compliant
Luminous Flux @ Current - Test-Other names160-1487-2
LTSTS320KRKT
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
Page 1/11

Download datasheet (619Kb)Embed
Next
LITE-ON TECHNOLOGY CORPORATION
Features
* Meet ROHS, Green Product.
* Side Looking Special For LCD Backlight.
* Ultra Bright AlInGaP Chip LED.
* Package In 8mm Tape On 7" Diameter Reels.
* EIA STD package.
* I.C. compatible.
* Compatible With Automatic Placement Equipment.
* Compatible With Infrared And Vapor Phase Reflow Solder Process.
Package
Dimensions
Part No.
LTST-S320KRKT
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-S320KRKT
BNS-OD-C131/A4
P r o p e r t y o f L i t e - O n O n l y
Lens
Water Clear
Source Color
AllnGaP Red
Page :
1
of
11

LTST-S320KRKT Summary of contents

  • Page 1

    ... Compatible With Automatic Placement Equipment. * Compatible With Infrared And Vapor Phase Reflow Solder Process. Package Dimensions Part No. LTST-S320KRKT Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.10 mm (.004") unless otherwise noted. Part No. : LTST-S320KRKT BNS-OD-C131/ Lens Water Clear Source Color AllnGaP Red Page : 1 of ...

  • Page 2

    ... Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) DC Forward Current Derating Linear From 50°C Reverse Voltage Operating Temperature Range Storage Temperature Range Wave Soldering Condition Infrared Soldering Condition Vapor Phase Soldering Condition Part No. : LTST-S320KRKT BNS-OD-C131/ Ta=25 ℃ At LTST-S320KRKT 0.4 5 260°C For 5 Seconds 260° ...

  • Page 3

    ... LITE-ON TECHNOLOGY CORPORATION Suggestion Profile: (1) Suggestion IR Reflow Profile For Normal Process (2) Suggestion IR Reflow Profile For Pb Free Process file file ila Part No. : LTST-S320KRKT BNS-OD-C131/ Page : ...

  • Page 4

    ... CIE eye-response curve. 2. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λ derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. : LTST-S320KRKT BNS-OD-C131/ Ta=25 ℃ At Part No ...

  • Page 5

    ... LITE-ON TECHNOLOGY CORPORATION Bin Code List Luminous Intensity Bin Code Part No. : LTST-S320KRKT BNS-OD-C131/ Min. M 18.0 N 28.0 P 45.0 Q 71.0 R 112.0 Tolerance on each Intensity bin is +/-15% Unit : mcd @20mA Max. 28.0 45.0 71.0 112.0 180.0 Page : ...

  • Page 6

    ... LITE-ON TECHNOLOGY CORPORATION Typical (25 °C Part No. : LTST-S320KRKT BNS-OD-C131/ Electrical / Optical Characteristics Ambient Temperature Unless Curves Otherwise Noted) Page : ...

  • Page 7

    ... Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No. : LTST-S320KRKT BNS-OD-C131/ Page : ...

  • Page 8

    ... LITE-ON TECHNOLOGY CORPORATION Notes: 1. Empty component pockets sealed with top cover tape inch reel-3000 pieces per reel. 3. Minimum packing quantity is 500 pcs for remainders. 4. The maximum number of consecutive missing lamps is two accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTST-S320KRKT BNS-OD-C131/ Page : ...

  • Page 9

    ... All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. Part No. : LTST-S320KRKT BNS-OD-C131/ CAUTIONS ...

  • Page 10

    ... Normal Process Test IR-Reflow Pb Free Process Solderability 8. Others The appearance and specifications of the product may be modified for improvement without prior notice. Part No. : LTST-S320KRKT BNS-OD-C131/ Test Condition Ta= Under Room Temperature As Per Data Sheet Maximum Rating *Test Time= 1000HRS (-24HRS,+72HRS)*@20mA. IR-Reflow In-Board, 2 Times Ta= 65± ...

  • Page 11

    ... No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycles? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? Part No. : LTST-S320KRKT BNS-OD-C131/ Page : ...