LTL-911VYKSA Lite-On Electronics, LTL-911VYKSA Datasheet - Page 11

• Manufacturer Part Number: LTL-911VYKSA
• Description: LED 7.6MM SQ ALINGAP AMBER CLEAR
• Manufacturer: Lite-On Electronics

Specifications of LTL-911VYKSA

• Color: Amber
• Luminous Flux @ Current - Test: 2 lm
• Current - Test: 70mA
• Wavelength - Dominant: 595nm
• Wavelength - Peak: 598nm
• Voltage - Forward (vf) Typ: 2.15V
• Lens Type: Clear
• Lens Style/size: Round, 3mm
• Package / Case: 4-DIP (0.200", 5.08mm)
• Size / Dimension: 7.62mm L x 7.62mm W
• Height: 4.00mm
• Viewing Angle: 70°
• Mounting Type: Through Hole
• Resistance Tolerance: 595nm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Millicandela Rating: -
• Other names: 160-1508; LTL911VYKSA

6. Drive Method
7. ESD (Electrostatic Discharge)
BNS-OD-C131/A4
Part No. : LTL911VxKSA/LTL912VxKSA
Suggestions to prevent ESD damage:
ESD-damaged Leeds will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and
Vf of the suspect LEDs at low currents.
Static Electricity or power surge will damage the LED.
The Vf of “good” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product.
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
(A) Recommended circuit
Use a conductive wrist band or anti- electrostatic glove when handling these LEDs
All devices, equipment, and machinery must be properly grounded
Work tables, storage racks, etc. should be properly grounded
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
plastic lens as a result of friction between LEDs during storage and handing
of those LEDs
Circuit model A
LED
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Circuit model B
LED
Page :
11
of
12