OKR-T/10-W12-C Murata Power Solutions Inc, OKR-T/10-W12-C Datasheet - Page 11

• Manufacturer Part Number: OKR-T/10-W12-C
• Description: CONV DC/DC 10A 12VIN POL SIP
• Manufacturer: Murata Power Solutions Inc
• Series: Okami™ OKR-T/10-W12r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of OKR-T/10-W12-C

• Number Of Outputs: 1
• Package / Case: 5-SIP Module
• Output: 0.591 ~ 6VDC
• Power (watts): 50W
• Mounting Type: Through Hole
• Voltage - Input: 4.5 ~ 14V
• 1st Output: 0.591 ~ 6 VDC @ 10A
• Size / Dimension: 0.41" L x 0.30" W x 0.65" H (10.4mm x 7.6mm x 16.5mm)
• Power (watts) - Rated: 50W
• Efficiency: 92%
• Approvals: EN, IEC, UL
• Output Power: 15 W
• Input Voltage Range: 4.5 V to 14 V
• Input Voltage (nominal): 12 V
• Output Voltage (channel 1): 0.591 V to 6 V
• Output Current (channel 1): 10 A
• Package / Case Size: SIP
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 811-2180

Murata Power Solutions recommends the specifi cations below when installing these converters. These specifi cations vary depending on the solder type. Exceeding these specifi ca-
tions may cause damage to the product. Your production environment may differ; therefore please thoroughly review these guidelines with your process engineers.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
Maximum Preheat Temperature
Maximum Pot Temperature
Maximum Solder Dwell Time
OKR-T/3-W12-C OSCILLOGRAMS – Vout = 5V
Step Load Transient Response (Vin=12V, Vout=5V, Cload=0, Iout=1.5A to 3A)
On/Off Enable Startup (Vin=13.8V, Vout=5V, Iout=3A, Cload=0)
Trace 2=Vout, Trace 4=Iout, 1A/div.
Trace 4=Enable, Trace2=Vout
115° C.
270° C.
7 seconds
Maximum Preheat Temperature
Maximum Pot Temperature
Maximum Solder Dwell Time
www.murata-ps.com/locations
105° C.
250° C.
6 seconds
Adjustable Output 3-Amp SIP-mount DC/DC Converters
Output Ripple and Noise (Vin=12V, Vout=5V, Iout=3A, Cload=0, ScopeBW=100MHz)
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice.
Step Load Transient Response (Vin=12V, Vout=5V, Cload=0, Iout=3A to 1.5A)
Trace 2=Vout, Trace 4=Iout, 1A/div.
© 2010 Murata Power Solutions, Inc.
Page 11 of 11