S82R-6521 Omron, S82R-6521 Datasheet - Page 8

• Manufacturer Part Number: S82R-6521
• Description: POWER SPPLY SWITCHING 5/12V 2/2A
• Manufacturer: Omron
• Series: S82Rr

Specifications of S82R-6521

• Voltage - Output: 5V, 12V
• Number Of Outputs: 2
• Power (watts): 50W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 200 ~ 240VAC
• Mounting Type: Chassis Mount
• 1st Output: 5 VDC @ 3A
• 2nd Output: 12 VDC @ 3A
• Size / Dimension: 4.41" L x 6.34" W x 1.57" H (112mm x 161mm x 40mm)
• Power (watts) - Rated: 50W
• Operating Temperature: -10°C ~ 50°C
• Efficiency: 68%
• Approvals: CSA, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: S82R6521

Safety Precautions
■ Precautions for Safe Use
Mounting
Install the power supply so that heat is effectively dissipated, to
extend the life expectancy and improve the reliability of the power
supply.
Install the power supply so that air convection takes place around the
power supply as the power supply is designed for natural convection.
Provide a distance of at least 20 mm between the power supplies.
When installing two or more power supplies side-by-side, note the
following points.
Provide a distance of at least 20 mm between the power supplies.
Forced air cooling is strongly recommended.
Minor electric shock, fire, or Product failure may
occasionally occur. Do not disassemble, modify, or repair
the Product or touch the interior of the Product.
Minor burns may occasionally occur. Do not touch the
Product while power is being supplied or immediately
after power is turned OFF.
Fire may occasionally occur. Tighten terminal screws to
the specified torque 0.74 N·m (M3.5).
Minor injury due to electric shock may occasionally occur.
Do not touch the terminals while power is being supplied.
Minor electric shock, fire, or Product failure may
occasionally occur. Do not allow any pieces of metal or
conductors or any clippings or cuttings resulting from
installation work to enter the Product.
http://www.ia.omron.com/
Metal plate
!CAUTION
20 mm min.
Air
Mounting Method
The Power Supply can be mounted in three different mounting styles,
as follows:
(A) Side mounting
(B) Bottom mounting
(C) Front mounting
■ Serial Operation
The V
The V
series.
■ Parallel Operation
The V
Furthermore, the V
operated in parallel.
■ Generating Output Voltages (±)
(S82R-@@27 and S82R-@@28)
± outputs can be made with V
supplied short bar.
Incorrect
Incorrect
Correct
For details, refer to Front Mounting Bracket on page 7.
1
1
1
output and V
or V
output and V
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Input
2
Input
output and other power supplies cannot be operated in
Input
1
2
2
or V
output cannot be operated in series.
output cannot be operated in parallel.
2
output and other power supplies cannot be
INPUT
INPUT
INPUT
INPUT
(B)
1
INPUT
and V
+V
−V
+V
−V
+V
−V
+V
−V
2
outputs by attaching the
G1
G2
V1
V2
(A)
S82R
8