SWT30-522 TDK Corporation, SWT30-522 Datasheet - Page 8

• Manufacturer Part Number: SWT30-522
• Description: PWR SUP 30W +5 +12 -12V TRIPLE
• Manufacturer: TDK Corporation
• Series: SWT30r

Specifications of SWT30-522

• Voltage - Output: 5V, ±12V
• Number Of Outputs: 3
• Power (watts): 30W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 5 VDC @ 2A
• 2nd Output: 12 VDC @ 1.5A
• 3rd Output: -12 VDC @ 300mA
• Size / Dimension: 5" L x 3" W x 1.2" H (127mm x 76.2mm x 30.5mm)
• Power (watts) - Rated: 30W
• Operating Temperature: 0°C ~ 50°C
• Efficiency: 70%
• Approvals: CE, CSA, DENAN, EN, UL
• Line Regulation: 1%, 2%
• Load Regulation: 2%, 4%
• Brand/series: SWT30 Series
• Current, Output: 0.2 A (Min.), 0.4 A (Min.)
• Dimensions: 5 in. L x 3 in. H x 1.2 in. W
• Operation: Linear
• Output: -12 VDC @ 0.3 A, +5 VDC @ 2 A, +12 VDC @ 1.5 A
• Output Type: Triple
• Power, Output: 31.6 W
• Power, Rating: 31.6 W
• Primary Type: AC-DC
• Standards: UL Recognized, CSA Certified, CE Marked
• Voltage, Input: 85 to 265/110 to 340 VAC/VDC
• Voltage, Output: -12, +5, +12 VDC
• Voltage, Output 1: 5 V
• Voltage, Output 2: 12 V
• Voltage, Output 3: -12 V
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1068; SWT30522

SWT
A-280
SWT
(*10) When resuming operation in less than 5 sec. after power failure, soft start circuit will not limit
ITEMS/UNITS
Function
Environment
Isolation
Standards
Mechanical
Output
(*1) At 100VAC, 200VAC and max. output power (convection cooling), Ta=25℃.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required to be described as 100-120VAC,
(*3) Please refer to Fig A for measurement determination of line & load regulation and output ripple voltage.
(*4) From 85-132VAC / 170-265VAC, constant load.
(*5) From min. load - full load (maximum power), constant input voltage.
(*6) From 0℃ to +50℃, constant input voltage and load.
(*7) Current limiting with automatic recovery. Avoid to operate over load or dead short for more than 30 seconds.
(*8) Over voltage clamping by zener diode.
(*9) At standard mounting method, Fig B.
Input
200-240VAC, 50/60Hz on name plate.
(Measure with JEITA RC-9131 probe.)
the in-rush current at turn-on.
Voltage Range
Frequency
Efficiency (typ)
Current (100/200VAC)(typ) (*1) A
Inrush Current (100/200VAC)(typ) (*10) A
Nominal Voltage
Minimum Current
Maximum Current
Maximum Peak Current
Maximum Power
Maximum Line Regulation (*3)(*4) mV
Maximum Load Regulation (*3)(*5) mV
Temperature Coefficient (*3)(*6)
Maximum Ripple & Noise (*3) mVp-p
Hold-up Time (100VAC)(typ) (*1) ms
Voltage Adjustable Range
Over Current Protection (*7)
Over Voltage Protection (*8) VDC
Output Terminals
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Vibration
Shock
Cooling
Withstand Voltage
Isolation Resistance
Safety Standards
EMI
Weight
Size (WxHxD)
100
MODEL
(*2) V
(*2) Hz
(*9) ℃
(*1) ％
VDC
％RH
％RH
mm
℃
CH
W
A
A
A
g
SWT100 Specifications
I/P-O/P: 3kVAC(20mA), I/P-FG: 2.5kVAC(20mA), O/P-FG: 500VAC(100mA) for 1min
Approved by UL60950-1, CSA C22.2 No.60950-1, EN60950-1. Built to meet DENAN.
0.5
+5
1
8
SWT100-522
10 - 55Hz amplitude (sweep 1min) Less than 19.6m/s² X, Y, Z 1Hr each
More than 100MΩ at Ta=25℃ and 70%RH, Output - FG 500VDC
97.6
+12
2
4
Shipment condition: CH1: ±1%, CH2: ±3%, CH3: ±5%
Convection cooling 0 to 50: 100% load; 60: 70% load
Built to meet EN55011 / 55022-B, VCCI-B, FCC-B
0
All channels common ground (3 terminals)
0.8
-12
Automatic recovery, O.C.P point: >105%
3
AC85-265 (Continuously) /DC110-340
±5V: 120; ±12V: 150; ±15V: 150
CH1: 2%, CH2: 4%, CH3: 2%
CH1: 1%, CH2: 2%, CH3: 1%
CH1 +5V fixed, CH2.3 fixed
0.5
+5
30 - 90 (No dewdrop)
10 - 95 (No dewdrop)
1
8
Less than 196.1m/s²
108.0 x 196.9 x 45.0
Convection cooling
15 / 30 (Ta=25℃)
SWT100-525
>6 (CH1 only)
-20 to +85
0.04%/℃
2.9 / 1.9
47-63
+12
600
74
92
17
ー
2
4
・All specifications are subject to change without notice.
0
0.8
-5
3
●Recommended EMC Filter
Please refer to "TDK-Lambda
EMC Filters" catalog.
RSEL-2006W
0.5
+5
1
8
SWT100-5FF
100
+15
3.2
2
0
-15
0.8
3