CX1004 Xeltek, CX1004 Datasheet - Page 69

• Manufacturer Part Number: CX1004
• Description: SOCKET ADAPTER 48TSOP SUPERPRO5K
• Manufacturer: Xeltek

Specifications of CX1004

• Module/board Type: Socket Module - TSOP
• Positions/sockets: 48
• Accessory Type: TSOP48 (20*28 Socket Size) Adapter For SuperPro 5000/5004GP
• Rohs Compliant: Yes
• For Use With/related Products: SuperPro 5000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1039

Edit Auto
To set the order of the batch processing functions, select Edit Auto from the
Options menu. The system displays the Edit Auto screen. Refer to Edit Auto on
page 45 for detailed information on the Edit Auto screen.
Configure the Device
For devices that include the configuration word, you must set the configuration
word before programming to ensure that the chip can be used on the target
system.
The configuration words for some devices are contained in the data file. Therefore,
the system automatically loads the configuration word into the configuration
word buffer when loading the data file.
On some devices, you must manually make the selection. Select Device
Configuration Word from the Device menu to open the ConfigWord screen. Refer
to Device Configuration Word on page 37 for detailed information about the
ConfigWord screen.
Review the Device Information
Some devices must meet some special requirements for programming a chip,
including special algorithms conventions. Read the device manual or instructions
carefully and adjust the operation steps or buffer data as needed. If an adapter is
required for programming, the system displays information about the adapter in
the device information screen. Refer to Dev. Information on page 35 for detailed
information about the device information display.
Execute Programming
Insert the chip properly into the socket. If the prompt information indicates a need
for an adaptor, you may purchase the adapter.
The operation steps for programming a chip are follows:

Superpro
Program
Blank Check 
Notes:You can skip this step if the chip is brand new. 
®
The Blank Check fails on electrically erasable chips containing some
information. In this case, perform the Erase operation first. You do not
need to erase EPROM chips for which the data can be overwritten.
5000 User’s Guide
69