CP2201EK Silicon Laboratories Inc, CP2201EK Datasheet - Page 11

• Manufacturer Part Number: CP2201EK
• Description: KIT EVAL FOR CP2201 ETH CTRLR
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of CP2201EK

• Main Purpose: Interface, Ethernet Sensor
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2200, CP2201
• Primary Attributes: Temperature and Light Sensor
• Secondary Attributes: Graphic User Interface
• Interface Type: Ethernet
• Product: Modules
• Silicon Manufacturer: Silicon Labs
• Silicon Core Number: CP2201
• Silicon Family Name: CP220x
• Kit Contents: CP2201 Evaluation Board, Power Adapter, CAT5e Ethernet Cable, CD-ROM, Quick-Start Guide
• For Use With/related Products: CP2201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1316

PC Configuration
Configure the PC to have a static IP address. The steps below show how to configure a Windows PC to use a static
IP address.
1. Open the Network Connections Folder. This is accessible from the control panel or from the start menu by
2. Right-click on the Local Area Connection and select Properties.
3. Select Internet Protocol (TCP/IP) and click Properties. Optionally, if the Show icon in notification area when
4. Select Use the following IP address and specify an IP address and subnet mask for the PC. For a subnet
5. Click OK after the static IP address and subnet mask have been configured. The PC will now be able to
right-clicking on My Network Places and selecting Properties.
connected is checked, right-clicking the system tray icon will provide a quick shortcut to the LAN properties
dialog and can be used as an indicator that the network is functioning properly.
mask of 255.255.255.0, the embedded system’s IP address must match the first three octets of the PC’s IP
address for the PC to recognize the embedded system. See Section for additional information about
choosing the embedded system’s IP address.
Note: When entering an IP or subnet address into the dialog box, the cursor will automatically advance to
the next field for a three digit octet. If entering a one or two digit octet, the spacebar, right arrow key, or ‘.’
can be pressed to advance to the next field.
access the embedded system using a crossover cable.
Figure 19. IP Address and Subnet Mask Window
Figure 18. Internet Protocol Properties Window
Rev. 0.1
CP2201-EK
11