101-1274 Rabbit Semiconductor, 101-1274 Datasheet - Page 90

• Manufacturer Part Number: 101-1274
• Description: KIT DEV STANDARD RCM5700
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: MCUr

Specifications of 101-1274

• Interface Type: Ethernet, SPI
• Operating Temperature Range: - 40 C to + 85 C
• Product: Modules
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: 10/100 Base-T Ethernet, Serial To Ethernet Bridge
• Development Tool Type: Development Kit
• Rohs Compliant: Yes
• For Use With/related Products: RCM5700
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Contents: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1151

F.1 TCP/IP Connections
Programming and development can be done with the MiniCore without connecting the Ethernet
port to a network. However, if you will be running the sample programs that use the Ethernet
capability or will be doing Ethernet-enabled development, you should connect the Ethernet port
on the Interface Board at this time.
Before proceeding you will need to have the following items.
• If you don’t have Ethernet access, you will need at least a 10Base-T Ethernet card (available
• Two CAT 4/5 Ethernet cables and a hub, or one CAT 4/5 Ethernet cable.
The Ethernet cables and a 10Base-T Ethernet hub are available from Rabbit in a TCP/IP tool kit.
More information is available at www.rabbit.com.
Now you should be able to make your connections.
1. Connect the AC adapter and the USB cable as shown in Chapter 2, “Getting Started.”
2. Ethernet Connections
•
•
MiniCore RCM5700/RCM6700 User’s Manual
from your favorite computer supplier) installed in a PC.
There are four options for connecting the Interface Board to a network for development and
runtime purposes. The first two options permit total freedom of action in selecting network
addresses and use of the “network,” as no action can interfere with other users. We recommend
one of these options for initial development.
No LAN —
Ethernet port directly to the PC’s network interface card using an CAT 4/5 Ethernet cable.
Micro-LAN —
10Base-T hub and connect both the PC’s network interface card and the Interface Board’s
Ethernet port to it using standard network cables.
A
PPENDIX
The simplest alternative for desktop development. Connect the Interface Board’s
Another simple alternative for desktop development. Use a small Ethernet
F. U
SING THE
rabbit.com
TCP/IP F
EATURES
90