101-0577 Rabbit Semiconductor, 101-0577 Datasheet - Page 60

• Manufacturer Part Number: 101-0577
• Description: KIT DEV FOR BL2500 COYOTE
• Manufacturer: Rabbit Semiconductor
• Series: Coyoter
• Type: Single Board Computers (SBC)r

Specifications of 101-0577

• Contents: SBC, Dev. Board, AC Adapter, Cable and Dynamic C® CD-ROM
• Product: Modules
• Data Bus Width: 10 bit
• Processor Type: Rabbit 3000
• Sram: 128 KB
• Flash: 256 KB
• Number Of I/os: 24
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 8 V to 40 V
• Power Consumption: 1 W
• Board Size: 100 mm x 100 mm x 29 mm
• Description/function: Computer Module
• Interface Type: Ethernet
• For Use With/related Products: BL2510
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PARAMETERS
RETURN VALUE
SEE ALSO
PARAMETERS
RETURN VALUE
SEE ALSO
54
int pwmOut(unsigned int channel, int rawdata);
void pwmOutVolts(unsigned int channel,
Sets a voltage (0 to V
Call pwmOutConfig() and pwm_init() before using this function. (An exception error will occur
if these functions were not been called previously.)
channel is the PWM output channel to write: 0 for DA0, 1 for DA1
rawdata is data value (0–1024) for a 1024 clock count cycle. The value may be calculated using the
percent duty cycle value (percentage that is on or high) of the 1024 clock count cycle, for example,
0.25*1024.
0 if successful
Sets the voltage of an analog output channel by using the previously set calibration
rect data values.
Call pwmOutConfig() and pwm_init() before using this function. (An exception error will occur
if these functions were not been called previously.)
channel is the output channel 0 or 1 to write: 0 for DA0, 1 for DA1
voltage is the voltage desired on the output channel (0–3.3 V)
None.
float voltage);
pwmOutConfig, pwm_init
pwmOut, pwmOutConfig, pwm_init
dd
) on an analog output channel given a data point on the 1024 clock count cycle.
constants to calculate the cor-
Coyote (BL2500)