MP-ISP/ST7 SofTec Microsystems SRL, MP-ISP/ST7 Datasheet

MP-ISP/ST7

Manufacturer Part Number

MP-ISP/ST7

Description

PROGRAMMER GANG 8 UNITS ST7

Manufacturer

SofTec Microsystems SRL

Type

In-Circuit Gang Programmerr

Datasheet

1.MP-ISPST7.pdf (1 pages)

Specifications of MP-ISP/ST7

Contents

MP8011A Base Unit and 8 PH-ST7FZ Programming Heads

For Use With/related Products

ST7 Flash MCUs

Lead Free Status / RoHS Status

Contains lead / RoHS non-compliant

Current page: 1 of 1
Download datasheet (333Kb)

Overview

The MP-ISP/ST7 In-Circuit Gang Programmer, in combination with a

standard personal computer, is a full-featured, high-performance multiple

(gang) programming system specific for ST7 FLASH microcontrollers.

MP-ISP/ST7 is able to in-circuit program up to eight devices.

MP-ISP/ST7 is composed of a single, universal and upgradable base

unit, ready to support current and future devices (code: MP8011A) and

by eight “programming heads” (code: PH-ST7FZ). Each programming

head features a header connector with all the necessary ISP signals

required to in-circuit program the target system (the same MP8011A

base unit can be used in conjunction with a wide range of other optionally

purchasable programming heads for traditional socket programming).

MP-ISP/ST7 is a PC-hosted system: it communicates with the host PC

through the LPT parallel port. Blank checking, reading, erasing,

programming and verifying operations are supported. MP-ISP/ST7 is

ready to support future devices. The upgrade operation for the support of

new devices is as simple as downloading new releases of the PC

software.

The MP-ISP/ST7 comes with the main gang programmer unit

(MP8011A), eight ISP programming heads (PH-ST7FZ), eight ISP flat

cables to connect to the target systems to be programmed, external

power supply adapter, parallel cable and user’s guide.

The User Interface

The MP-ISP/ST7 user interface has two separate windows for editing the

code and data memory (if present) of the device to be programmed. An

Running the Gang Programmer

MP-ISP/ST7

In-Circuit Gang Programming System for ST7 FLASH Family

User Interface

HOST PC

Parallel Cable

simultaneously. Each target board is connected to an ISP

Up to eight target boards can be in-circuit programmed

Programming Head via an ISP flat cable.

TARGET BOARDS

Info panel always displays information about the device to be

programmed. Additionally, the status of the programming sites is shown

together with the statistics about the programmed device. The editing of

the Option Byte(s) is simplified through a special dialog box—the Option

Bytes dialog box is specific for each device and allows you to edit each

single bit of the option bytes of the device you are working with. MP-

ISP/ST7 can perform blank checking, erasing, reading, programming and

verifying operations. A special operation, the Auto operation, groups the

blank checking, erasing, programming and verifying operations in a

single operation, speeding up the programming process. All of the

operations share a common, simple, easy-to-use dialog box.

Protected Mode

Protected Mode simplifies the programming process by means of an

easy, guided procedure that requires no special knowledge. Protected

Mode is suitable when programming large amounts of devices. Entering

and exiting the Protected Mode is password protected.

Software Upgrades

SofTec Microsystems is continuously adding the support for new devices

to the MP-ISP/ST7 Gang Programming System. The latest version of the

user interface is always available free of charge at our download page.

Microcontroller Development Tools

www.softecmicro.com

Composed of an Universal Base plus up

ISP GANG PROGRAMMER

to eight ISP Programming Heads

ISP Cables

Universal Base Unit

(code: MP8011A)

ISP Programming Heads

(code: PHST7FZ)

Supported Devices

ST72F260

ST72F262

ST72F264

ST72F321

ST72F324

ST72F324L

ST72F521

ST72F561

ST72F621

ST72F622

ST72F623

ST72F63B

The support for new devices is added

constantly. For the latest list of supported

devices, please visit our web site.

Programming Functions

Load File, Edit Buffers (Code and Data

Memory), Edit Option Bytes, Read Master,

Blank Check, Erase, Program, Protect, Verify,

Auto, Statistics.

Programming Times

Programming times depend on the

microcontroller’s FLASH memory technology,

memory size and oscillator frequency. For eight

HDFlash devices (ST72F324, 521, 561, 621,

651, etc.) with 32 KB and an oscillator

frequency of 16 MHz, total programming time is

about 13 seconds (including program Code,

verify Code, program Options, verify Options).

For eight XFlash devices (ST72F264, LITE0,

LITE2, etc.) with 8 KB and an oscillator

frequency of 16 MHz, total programming time is

about 4 seconds (including program Code,

verify Code, program Options, verify Options).

System Requirements

• A PC running Win 9x, 2000, Me, NT or XP;

• 64 MB of RAM plus 20 MB of HD space;

• One free parallel port.

Ordering Information

Order code: MP-ISP/ST7. The following items

are included:

• The programmer’s base unit (MP8011A);

• Eight ISP programming heads (PHST7FZ);

• Eight ISP flat cables;

• A power adapter;

• A parallel cable;

• A test board;

• The user interface software;

• User’s manual.

Customers who already own the MP8011A unit

need only purchase the ISP programming

heads (code PHST7FZ) in order to get a full ISP

programming system.

Each ISP programming head features a header

connector with all the necessary ISP signals

required to in-circuit program the target

system. ISP flat cables to connect to the target

systems are provided.

OSC_CLK

GND

ISP CONNECTOR

ST72F651

ST72F652

ST7FDALI

ST7FLITE0

ST7FLITE1

ST7FLITE2

ST7FLITEBC

ST7FLITES

ST7FMC1

ST7FMC2

ICCDATA

ICCCLK

RESET

ICCSEL/V

Related parts for MP-ISP/ST7

Related keywords

MP-ISP/ST7 datasheet
MP-ISP/ST7 data sheet
MP-ISP/ST7 pdf datasheet
MP-ISP/ST7 component
MP-ISP/ST7 part
MP-ISP/ST7 distributor
MP-ISP/ST7 RoHS
MP-ISP/ST7 datasheet download