HS2556EPI61H Renesas Electronics America, HS2556EPI61H Datasheet - Page 92

• Manufacturer Part Number: HS2556EPI61H
• Description: EMULATOR BASE H8SX/2556
• Manufacturer: Renesas Electronics America

Specifications of HS2556EPI61H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

[Required number of event occurrences]:
[Enable Sequencing]:
[Configure Sequence…]: Displays the [Event Sequencing] dialog box to allow the event sequencing to be
(5) [Event Sequencing] dialog box
This dialog box allows the user to define which events are triggered by other events. If this dialog box is
accessed (directly or indirectly) from [Trace Acquisition…], only those events assigned to the trace subsystem
are displayed. If accessed from the [Eventpoint] window, only the breakpoint or timer events are shown.
[Event]:
[Is Armed By]:
[Is Reset By]:
[No occurrence of]:
The test of conditions on event points is started with the execution of the user program. The conditions on event
points have not been satisfied immediately after the execution of the user program is started.
Satisfaction of the condition on an event point allows a transition of the state to that where the condition is
satisfied.
70
Allows a 16-bit pass count to be set. The event must occur the specified number of
times before the action is taken. The range of values is D’0 to D’65,535.
Allows the event to take part in a sequence of events (setting this requires the event to
use an event detector).
configured (only available when [Enable Sequencing] has been selected).
Selects an event point to be set.
Arms the selected event.
Resets the selected event.
Arms an event when the set of events being selected does not occur (only available
when [Is Armed By] has been selected).
Figure 5.26 [Event Sequencing] Dialog Box