TOOLSTICK530MPP Silicon Laboratories Inc, TOOLSTICK530MPP Datasheet - Page 5

• Manufacturer Part Number: TOOLSTICK530MPP
• Description: ADAPTER PROG TOOLSTICK F530MPP
• Manufacturer: Silicon Laboratories Inc
• Series: ToolStickr
• Type: Microcontroller Programmerr

Specifications of TOOLSTICK530MPP

• Contents: 2 Boards and USB Connecting Cable
• Processor To Be Evaluated: C8051F53xA-IM
• Interface Type: USB
• Operating Supply Voltage: 2.7 V to 3.6 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F530/531/533/534/536/537-IM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1456

Step 3. Insert the MCU into the socket
Note: The Programming Adapter has a diagram of the MCU that shows the proper orientation of the MCU in the socket. The
The procedure for inserting the device into the socket depends on the type of socket (Clam-Shell, Top-Loader, or
ZIF).
Inserting a device into a Clam-Shell socket
A. Ensure that the ToolStick Base Adapter and the daughter card are on a level surface.
B. Press the latch to open the socket.
C. Using the tweezers, carefully insert the device into the socket in the same orientation that is shown in the orientation
D. Slowly close the socket so that the device does not move during the process.
diagram on the daughter card.
circle in the diagram corresponds to the circle on the top-side of the package. Please check the orientation of the device
before inserting into the socket. Inserting the device incorrectly into the socket could damage the device.
ToolSt ick Programming Adapter
Figure 7. Socket Orientation
Figure 8. Clam-Shell Socket
Rev. 0.3
5