G2R-1-S AC240(S) Omron, G2R-1-S AC240(S) Datasheet - Page 4

• Manufacturer Part Number: G2R-1-S AC240(S)
• Description: RELAY GP SPDT 240VAC PLUG-IN
• Manufacturer: Omron
• Series: G2RSr

Specifications of G2R-1-S AC240(S)

• Relay Type: General Purpose
• Contact Form: SPDT (1 Form C)
• Contact Rating (current): 10A
• Switching Voltage: 440VAC, 125VDC - Max
• Coil Type: Standard
• Coil Current: 3.2mA
• Coil Voltage: 240VAC
• Turn On Voltage (max): 192 VAC
• Turn Off Voltage (min): 72 VAC
• Mounting Type: Socket
• Termination Style: Quick Connect - .187" (4.7mm)
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 10A @ 250VAC
• Control On Voltage (max): 192 VAC
• Control Off Voltage (min): 72 VAC
• Contact Rating: 10 A
• Contact Termination: Pin
• Mounting Style: Plug-In
• Power Consumption: 0.9 VA
• Contact Material: Silver Alloy
• Coil Resistance: 30.36 K Ohms
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G2R-1-S-AC240(S); G2R-1S-AC240(S); G2R1SAC240S; Z2227

Terminals
■ Straight PCB Terminals
PCB terminals are normally straight.
Self-clinching (S-shaped) PCB
Terminals
Some relays have terminals that are bent into an “S” shape. This
secures the PCB relay to the PCB prior to soldering, helping the ter-
minals stay in their holes and keeping the relay level.
Dimensions
For miniature relays, the maximum dimensions and the average val-
ues ( ) marked with an asterisk are provided to aid the customer in
designing.
■ Mounting Orientation Mark
On the top of all OMRON relays is a mark indicating where the relay
coil is located. Knowing the coil location aids in designing PCBs
when spacing components. Also, pin orientation is easy to discern
when automatic or hand-mounting relays.
On dimensional drawings in all OMRON literature this mark is left-ori-
ented. Mounting holes, terminal arrangements, and internal connec-
tions follow this alignment. The following two symbols are used to
represent the orientation mark.
4
Detail
Symbol
Example
Drawing
view
Mounting holes
8 max.
(7.9)*
Mark
Electromechanical Relays
3.5
0.3
Mark
Bottom
(Bottom view)
0.4 x 0.4
16 max.
(15.9)*
Terminal
0.6
Terminal arrangement/
internal connections
*Average value
Mark
9.9 max.
(9.8)*
0.25
7.62
Technical Information
(Bottom view)
Top
■ Terminal Arrangement/Internal
Top View
If the terminal arrangement of a relay can be seen from above the
PCB, the top view of the relay is provided in the Dimensions section
of the catalog or data sheet.
Bottom View
If the relay’s terminals cannot be seen from above the PC board, as
in this example, a bottom view is shown.
Rotation Direction to Bottom View
The bottom view shown in the catalog or data sheet is rotated in the
direction indicated by the arrow, with the coil always on the left.
Gull-wing SMT terminal
"Inside L" SMT terminal
Connections
Axis of rotation
Quick-connect
Plug-in
T I O N
terminal
terminal