G6KU-2F-Y DC3 Omron, G6KU-2F-Y DC3 Datasheet
G6KU-2F-Y DC3
Specifications of G6KU-2F-Y DC3
G6KU-2F-YDC3
G6KU2FYDC3
Z3030
Related parts for G6KU-2F-Y DC3
G6KU-2F-Y DC3 Summary of contents
Page 1
... VDC G6K Single-winding Single-side stable Bellcore: latching 2, 500 V for 2x10 µs G6KU-2P-Y G6K-2P-Y G6KU-2G-Y G6K-2G-Y G6KU-2F-Y G6K-2F-Y Outside-L surface mounting terminal Inside-L surface mounting terminal PCB terminal Does not conform to Telcordia specifications UL, CSA Conforms to Telcordia specifications: 2,500 V for µs RC ...
Page 2
... The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. 2. The operating characteristics are measured at a coil temperature of 23°C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously. Single-winding Latching Models (Bellcore Version) G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y Rated voltage 3 VDC Rated current 33 Ω ...
Page 3
... Always double-check relay suitability under actual operating conditions. Single-side stable models (double-pole) G6K-2F-Y, G6K-2G-Y, G6K-2P-Y 2,500 µs), 1,500 V (10 x 160 µs) 2 (approx. 30G) 2 (approx. 20G) 2 (approx. 100G) 2 (approx. 75G) G6K Single-winding latching model G6KU-2F-Y, G6KU-2G-Y, G6KU-2P max. (approx. 1.2 ms max. (approx. 1.2 ms) 3 ...
Page 4
... Note: The tests were conducted at an ambient temperature of 23˚C. G6K Ambient Temperature vs. Switching Current Ambient temperature (°C) Ambient Temperature vs. Must Set or Must Reset Voltage G6KU-2G (F/P)-Y Max. estimated value Ambient temperature (°C) Electrical Endurance (Contact Resistance) (See note.) G6K-2G (F/P), G6K-2G (F/P)-Y NO Sample: G6K-2G ...
Page 5
... Not energized Average value Initial stage Test Sample Energized Average value (Average value) Sample: G6K-2G Must operate voltage Number of Relays: 10 Must release voltage External magnetic field (A/m) High-frequency Characteristics (Return Loss) G6K-2G (F/P),G6K-2G (F/P)-Y (Average value) 0 1.4 Sample: G6K-2G Number of Relays ...
Page 6
... Bounce Time Distribution (See note.) G6K-2G (F/P) , G6K-2G (F/P)-Y Must operate bounce time Must release bounce time Sample: G6K-2G Number of Relays: 50 Time (ms) Mounting Dimensions (Top View) Tolerance: ±0.1 mm Mounting Dimensions (Top View) Tolerance: ±0.1 mm Mounting Dimensions (Bottom View) Terminal Arrangement/ Tolerance: ±0.1 mm Eight, 0 ...
Page 7
... Note: Each value has a tolerance of ±0.3 mm. G6K-2P-Y Note: Each value has a tolerance of ±0.3 mm. G6KU-2F-Y Note: Each value has a tolerance of ±0.3 mm. G6KU-2G-Y Note: Each value has a tolerance of ±0.3 mm. G6KU-2P-Y Note: Each value has a tolerance of ±0.3 mm. Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections Tolerance: ±0.1 mm (Top View) ...
Page 8
... Industrial Association of Japan)) Reel type:RPM-16D (EIAJ) Relays per Reel: 900 1. Direction of Relay Insertion Top tape (cover tape) Carrier tape Emboss tape 2. Reel Dimensions 8 Stopper (green) 3. Carrier Tape Dimensions Pulling direction G6K-2F, G6K-2F-Y, G6KU-2F-Y Orientation mark Pulling direction G6K-2G, G6K-2G-Y, G6KU-2G-Y G6K ...
Page 9
... Time (s) • The thickness of cream solder to be applied should be within a range between 150 and 200 µm on OMRON’s recommended PCB pattern. • In order to perform correct soldering recommended that the correct soldering conditions be maintained as shown below on the left side. Correct Soldering ...
Page 10
... G6K Precautions Refer to PCB Relays Catalog (X033) for information on general precautions. Be sure to read these precautions before using the Relay. Correct Use Long-term Continuously ON Contacts Using the Relay in a circuit where the Relay will be ON continu- ously for long periods (without switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces ...
Page 11
G6K G6K 11 ...
Page 12
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K106-E1-04 In the interest of product improvement, specifications are subject to change without notice. OMRON RELAY & DEVICES Corporation Low Signal Relay Division Marketing & Product Engineering Department 1110, Sugi, Yamaga-city, Kumamoto-Pref., 861-0596 Japan ...