381LX472M050H452 Cornell Dubilier Electronics (CDE), 381LX472M050H452 Datasheet - Page 2

• Manufacturer Part Number: 381LX472M050H452
• Description: CAP 4700UF 50V ELECT SNAP IN
• Manufacturer: Cornell Dubilier Electronics (CDE)
• Series: 381LXr

Specifications of 381LX472M050H452

• Capacitance: 4700µF
• Tolerance: ±20%
• Voltage Rating: 50V
• Lead Spacing: 0.394" (10.00mm)
• Lifetime @ Temp.: 3000 Hrs @ 105°C
• Operating Temperature: -40°C ~ 105°C
• Features: General Purpose
• Ripple Current: 2.5A
• Esr (equivalent Series Resistance): 53.0 mOhm
• Mounting Type: Through Hole
• Package / Case: Radial, Can - Snap-In
• Size / Dimension: 0.866" Dia (22.00mm)
• Height: 1.772" (45.00mm)
• Operating Temperature Range: - 40 C to + 105 C
• Diameter: 22 mm (0.87 in)
• Length: 45 mm (1.77 in)
• Product: Aluminum Electrolytic Capacitors
• Termination Style: Snap In
• Peak Reflow Compatible (260 C): Yes
• Termination Type: Snap-In
• Capacitor Terminals: Quick Connect
• Working Voltage, Dc: 50V
• Leaded Process Compatible: Yes
• Rohs Compliant: Yes
• Esr: 0.053 Ohms
• Leakage Current: 4 mAmps
• Load Life: 3000 Hrs
• Number Of Pins: 2, 4, 5
• Test Frequency: 120 Hz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Surface Mount Land Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

383L / LX (4 or 5 pins) 101 = 100 µF
High Ripple, Long Life, 2,4 and 5 pin styles available
Outline Drawings
Note that for 200 volts and under the insulating end disc is optional - If one is needed add a (+D) to the end of the part numbering system.
Four Pins
383L/LX (35 and 40 mm diameter)
Five Pins
383L/LX (40 and 50 mm diameter)
Two Pins
381L/LX (22 through 40 mm diameter)
381L / LX (2 pins)
383LX
Type
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: [phone] • Fax: [phone]
Terminal
272 = 2700 µF
100 = 10 µF M = ±20%
D
A
B
C
–
272
Cap
Tolerance
40 mm Dia.
negative (–)
positive (+)
dummy
dummy
dummy
M
Connection
200 = 200 Vdc
Voltage
200
50 mm Dia.
negative (–)
negative (–)
positive (+)
positive (+)
dummy
Code
Case
N08
Insulation
2 = PVC
Notes:
* Use dummy terminals for mechanical support only. Make no
electrical connection because they resistively connect through
the electrolyte to the negative terminal.
** Safety Vent may be on the bottom or on the side of the can.
2
Blank = 2 pins / 4 pins snap-in 6.3mm L
A = 2 pins / 4 pins snap-in 4.0mm L
VS = 5 pins snap-in 6.3mm L
V = 5 pins standoff
# of pins
V
Top of
Capacitor
Body
Top of
Capacitor
Body
Top of
Capacitor
Body
Available in 2, 4 and 5 pins
Available in 2 and 4 pins
4.0 mm pin length
option (add “A” to end
of part#)
5 pin Standoff pin
style (add “V” to end
of part#)
3.5
Blank = no end disk if <250 V
Available in 5 pins
D = end disk, any voltage
6.3 mm pin length
0.8
1.5 0.2
0.8
0.7
+0.2
-0.1
1.5 0.2
+0.2
-0.1
+D
2.0max.
3.75 0.1
1.5 0.1
2.0max.
0.6 min.