ATMEGA48A-PU Atmel, ATMEGA48A-PU Datasheet

IC MCU AVR 4K FLASH 28PDIP

ATMEGA48A-PU

Manufacturer Part Number
ATMEGA48A-PU
Description
IC MCU AVR 4K FLASH 28PDIP
Manufacturer
Atmel
Series
AVR® ATmegar
Datasheets

Specifications of ATMEGA48A-PU

Core Processor
AVR
Core Size
8-Bit
Speed
20MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
23
Program Memory Size
4KB (2K x 16)
Program Memory Type
FLASH
Eeprom Size
256 x 8
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 6x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
28-DIP (0.300", 7.62mm)
Controller Family/series
Atmega
No. Of I/o's
23
Eeprom Memory Size
256Byte
Ram Memory Size
512Byte
Cpu Speed
20MHz
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATMEGA48A-PU
Manufacturer:
Microchip Technology
Quantity:
1 051
Features
High Performance, Low Power AVR
Advanced RISC Architecture
High Endurance Non-volatile Memory Segments
Peripheral Features
Special Microcontroller Features
I/O and Packages
Operating Voltage:
Temperature Range:
Speed Grade:
Power Consumption at 1 MHz, 1.8V, 25°C
– 131 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
– 4/8/16/32K Bytes of In-System Self-Programmable Flash program memory
– 256/512/512/1K Bytes EEPROM
– 512/1K/1K/2K Bytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C
– Optional Boot Code Section with Independent Lock Bits
– Programming Lock for Software Security
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel 10-bit ADC in TQFP and QFN/MLF package
– 6-channel 10-bit ADC in PDIP Package
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte-oriented 2-wire Serial Interface (Philips I
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,
– 23 Programmable I/O Lines
– 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
– 1.8 - 5.5V
– -40
– 0 - 4 MHz@1.8 - 5.5V, 0 - 10 MHz@2.7 - 5.5.V, 0 - 20 MHz @ 4.5 - 5.5V
– Active Mode: 0.2 mA
– Power-down Mode: 0.1 µA
– Power-save Mode: 0.75 µA (Including 32 kHz RTC)
Mode
and Extended Standby
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
Temperature Measurement
Temperature Measurement
°
C to 85
°
C
®
8-Bit Microcontroller
2
C compatible)
(1)
8-bit
Microcontroller
with 4/8/16/32K
Bytes In-System
Programmable
Flash
ATmega48A
ATmega48PA
ATmega88A
ATmega88PA
ATmega168A
ATmega168PA
ATmega328
ATmega328P
Summary
Rev. 8271CS–AVR–08/10

Related parts for ATMEGA48A-PU

ATMEGA48A-PU Summary of contents

Page 1

... Active Mode: 0.2 mA – Power-down Mode: 0.1 µA – Power-save Mode: 0.75 µA (Including 32 kHz RTC) ® 8-Bit Microcontroller ( compatible) 8-bit Microcontroller with 4/8/16/32K Bytes In-System Programmable Flash ATmega48A ATmega48PA ATmega88A ATmega88PA ATmega168A ATmega168PA ATmega328 ATmega328P Summary Rev. 8271CS–AVR–08/10 ...

Page 2

... PC1 (ADC1/PCINT9 PC0 (ADC0/PCINT8) 18 GND AREF 6 16 AVCC (PCINT6/XTAL1/TOSC1) PB6 15 PB5 (SCK/PCINT5) 7 (PCINT7/XTAL2/TOSC2) PB7 NOTE: Bottom pad should be soldered to ground. 32UFBGA - Pinout ATmega48A/48PA/88A/88PA/168A/168PA 1 2 PD2 PD1 PC6 PD3 PD4 PD0 GND GND VDD VDD PB6 PD6 PB0 PB7 PD5 PD7 28 PDIP ...

Page 3

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 1.1 Pin Descriptions 1.1.1 VCC Digital supply voltage. 1.1.2 GND Ground. 1.1.3 Port B (PB7:0) XTAL1/XTAL2/TOSC1/TOSC2 Port 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port B output buffers have symmetrical drive characteristics with both high sink and source capability ...

Page 4

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P The various special features of Port D are elaborated in 89. 1.1 the supply voltage pin for the A/D Converter, PC3:0, and ADC7:6. It should be externally CC connected to V through a low-pass filter. Note that PC6...4 use digital supply voltage, V 1.1.8 AREF AREF is the analog reference pin for the A/D Converter. ...

Page 5

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 2. Overview The ATmega48A/48PA/88A/88PA/168A/168PA/328/328P is a low-power CMOS 8-bit microcon- troller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48A/48PA/88A/88PA/168A/168PA/328/328P achieves through- puts approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. ...

Page 6

... Atmel ATmega48A/48PA/88A/88PA/168A/168PA/328/328P is a powerful microcontroller that provides a highly flexible and cost effective solution to many embedded con- trol applications. The ATmega48A/48PA/88A/88PA/168A/168PA/328/328P AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits. ...

Page 7

... ATmega168PA ATmega328 ATmega328P ATmega48A/48PA/88A/88PA/168A/168PA/328/328P support a real Read-While-Write Self-Pro- gramming mechanism. There is a separate Boot Loader Section, and the SPM instruction can only execute from there. In ATmega 48A/48PA there is no Read-While-Write support and no separate Boot Loader Section. The SPM instruction can execute from the entire Flash. ...

Page 8

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 4. Register Summary Address Name Bit 7 (0xFF) Reserved – (0xFE) Reserved – (0xFD) Reserved – (0xFC) Reserved – (0xFB) Reserved – (0xFA) Reserved – (0xF9) Reserved – (0xF8) Reserved – (0xF7) Reserved – (0xF6) Reserved – (0xF5) Reserved – (0xF4) Reserved – ...

Page 9

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P Address Name Bit 7 (0xC1) UCSR0B RXCIE0 (0xC0) UCSR0A RXC0 (0xBF) Reserved – (0xBE) Reserved – (0xBD) TWAMR TWAM6 (0xBC) TWCR TWINT (0xBB) TWDR (0xBA) TWAR TWA6 (0xB9) TWSR TWS7 (0xB8) TWBR (0xB7) Reserved – (0xB6) ASSR – (0xB5) Reserved – ...

Page 10

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P Address Name Bit 7 (0x7F) DIDR1 – (0x7E) DIDR0 – (0x7D) Reserved – (0x7C) ADMUX REFS1 (0x7B) ADCSRB – (0x7A) ADCSRA ADEN (0x79) ADCH (0x78) ADCL (0x77) Reserved – (0x76) Reserved – (0x75) Reserved – (0x74) Reserved – (0x73) Reserved – ...

Page 11

... When using the I/O specific commands IN and OUT, the I/O addresses 0x00 - 0x3F must be used. When addressing I/O Registers as data space using LD and ST instructions, 0x20 must be added to these addresses. The ATmega48A/48PA/88A/88PA/168A/168PA/328/328P is a complex microcontroller with more peripheral units than can be supported within the 64 location reserved in Opcode for the IN and OUT instructions. For the Extended I/O space from 0x60 - 0xFF in SRAM, only the ST/STS/STD and LD/LDS/LDD instructions can be used ...

Page 12

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 5. Instruction Set Summary Mnemonics Operands ARITHMETIC AND LOGIC INSTRUCTIONS ADD Rd, Rr Add two Registers ADC Rd, Rr Add with Carry two Registers ADIW Rdl,K Add Immediate to Word SUB Rd, Rr Subtract two Registers SUBI Rd, K Subtract Constant from Register SBC Rd, Rr Subtract with Carry two Registers ...

Page 13

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P Mnemonics Operands BRIE k Branch if Interrupt Enabled BRID k Branch if Interrupt Disabled BIT AND BIT-TEST INSTRUCTIONS SBI P,b Set Bit in I/O Register CBI P,b Clear Bit in I/O Register LSL Rd Logical Shift Left LSR Rd Logical Shift Right ROL Rd Rotate Left Through Carry ROR ...

Page 14

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P Mnemonics Operands POP Rd Pop Register from Stack MCU CONTROL INSTRUCTIONS NOP No Operation SLEEP Sleep WDR Watchdog Reset BREAK Break Note: 1. These instructions are only available in ATmega168PA and ATmega328P. 8271CS–AVR–08/10 Description Rd ← STACK (see specific descr. for Sleep function) (see specific descr ...

Page 15

... Wide, Plastic Dual Inline Package (PDIP) 8271CS–AVR–08/10 (2) Ordering Code ATmega48A-AU (5) ATmega48A-AUR ATmega48A-CCU (5) ATmega48A-CCUR (4) ATmega48A-MMH (4)(5) ATmega48A-MMHR ATmega48A-MU (5) ATmega48A-MUR ATmega48A-PU 322. Package Type (1) Package Operational Range 32A 32A 32CC1 32CC1 Industrial 28M1 ° (- 28M1 32M1-A 32M1-A 28P3 ° ...

Page 16

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.2 ATmega48PA Speed (MHz) Power Supply (3) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 17

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.3 ATmega88A Speed (MHz) Power Supply (V) (3) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 18

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.4 ATmega88PA Speed (MHz) Power Supply (V) (3) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 19

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.5 ATmega168A (3) Speed (MHz) Power Supply (V) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 20

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.6 ATmega168PA (3) Speed (MHz) Power Supply (V) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 21

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.7 ATmega328 Speed (MHz) Power Supply (V) (3) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 22

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 6.8 ATmega328P Speed (MHz) Power Supply (V) (3) 20 1.8 - 5.5 Note: 1. This device can also be supplied in wafer form. Please contact your local Atmel sales office for detailed ordering information and minimum quantities. 2. Pb-free packaging complies to the European Directive for Restriction of Hazardous Substances (RoHS directive).Also Halide free and fully Green ...

Page 23

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 7. Packaging Information 7.1 32A PIN 0˚~7˚ L Notes: 1. This package conforms to JEDEC reference MS-026, Variation ABA. 2. Dimensions D1 and E1 do not include mold protrusion. Allowable protrusion is 0.25 mm per side. Dimensions D1 and E1 are maximum plastic body size dimensions including mold mismatch. 3. Lead coplanarity is 0.10 mm maximum. ...

Page 24

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 7.2 32CC1 BALL CORNER Note1: Dimension “b” is measured at the maximum ball dia plane parallel to the seating plane. Note2: Dimension “b1” is the solderable surface defined by the opening of the solder resist layer. Package Drawing Contact: packagedrawings@atmel.com 8271CS–AVR–08/10 Pin#1 ID ...

Page 25

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 7.3 28M1 Pin TOP VIEW 0.20 b 0.4 Ref BOTTOM VIEW (4x) The terminal # Laser-marked Feature. Note: Package Drawing Contact: packagedrawings@atmel.com 8271CS–AVR–08/ TITLE 28M1, 28-pad 1.0 mm Body, Lead Pitch 0.45 mm, 2.4 x 2.4 mm Exposed Pad, Thermally Enhanced Plastic Very Thin Quad Flat No Lead Package (VQFN) ...

Page 26

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 7.4 32M1 Pin TOP VIEW Pin #1 Notch (0. BOTTOM VIEW Note: JEDEC Standard MO-220, Fig. 2 (Anvil Singulation), VHHD-2. 2325 Orchard Parkway San Jose, CA 95131 R 8271CS–AVR–08/ TITLE 32M1-A, 32-pad 1.0 mm Body, Lead Pitch 0.50 mm, 3.10 mm Exposed Pad, Micro Lead Frame Package (MLF) ...

Page 27

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 7.5 28P3 A SEATING PLANE Note: 1. Dimensions D and E1 do not include mold Flash or Protrusion. Mold Flash or Protrusion shall not exceed 0.25 mm (0.010"). 2325 Orchard Parkway San Jose, CA 95131 R 8271CS–AVR–08/10 D PIN PLACES 0º ~ 15º REF eB TITLE 28P3, 28-lead (0.300"/7.62 mm Wide) Plastic Dual ...

Page 28

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 8. Errata 8.1 Errata ATmega48A The revision letter in this section refers to the revision of the ATmega48A device. 8.1.1 Rev. D • Analog MUX can be turned off when setting ACME bit 1. Analog MUX can be turned off when setting ACME bit If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared ...

Page 29

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 8.4 Errata ATmega88PA The revision letter in this section refers to the revision of the ATmega88PA device. 8.4.1 Rev. F • Analog MUX can be turned off when setting ACME bit 1. Analog MUX can be turned off when setting ACME bit If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared ...

Page 30

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 8.7 Errata ATmega328 The revision letter in this section refers to the revision of the ATmega328 device. 8.7.1 Rev D • Analog MUX can be turned off when setting ACME bit 1. Analog MUX can be turned off when setting ACME bit If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared ...

Page 31

... ATmega48A/48PA/88A/88PA/168A/168PA/328/328P 8.8 Errata ATmega328P The revision letter in this section refers to the revision of the ATmega328P device. 8.8.1 Rev D • Analog MUX can be turned off when setting ACME bit 1. Analog MUX can be turned off when setting ACME bit If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared ...

Page 32

... Figure 29-316 on page 499 Updated ”Packaging Information” on page 546 package. New datasheet 8271 with merged information for ATmega48PA, ATmega88PA, ATmega168PA and ATmega48A, ATmega88A andATmega168A. Also included information on ATmega328 and ATmega328P Changes done: – New devices added: ATmega48A/ATmega88A/ATmega168A and ATmega328 – Updated Feature Description – ...

Page 33

... Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI- TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ...

Related keywords