PIC12C671-04/SM Microchip Technology, PIC12C671-04/SM Datasheet - Page 240

• Manufacturer Part Number: PIC12C671-04/SM
• Description: IC MCU OTP 1KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04/SM

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: SOIC
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 4 Channel
• Package: 8SOIJ
• Device Core: PIC
• Family Name: PIC12
• Maximum Speed: 4 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PICmicro MID-RANGE MCU FAMILY
15.4.1.2
DS31015A-page 15-20
SDA
SCL
SSPIF
BF (SSPSTAT<0>)
SSPOV (SSPCON<6>)
S
Reception
A7 A6 A5 A4 A3 A2 A1
1
2
Receiving Address
3
When the R/W bit of the address byte is clear and an address match occurs, the R/W bit of the
SSPSTAT register is cleared. The received address is loaded into the SSPBUF register.
When the address byte overflow condition exists, then no acknowledge (ACK) pulse is given. An
overflow condition is defined as either the BF bit (SSPSTAT<0>) is set or the SSPOV bit
(SSPCON<6>) is set. So when a byte is received, with these conditions, and attempts to move
from the SSPSR register to the SSPBUF register, no acknowledge pulse is given.
An SSP interrupt is generated for each data transfer byte. The SSPIF flag bit must be cleared in
software. The SSPSTAT register is used to determine the status of the receive byte.
Figure 15-8:
4
5
6
7
R/W=0
8
I
ACK
2
9
C Waveforms for Reception (7-bit Address)
D7
1
D6
2
Cleared in software
SSPBUF register is read
Receiving Data
D5
3
D4
Bit SSPOV is set because the SSPBUF register is still full.
4
D3
5
D2
6
D1
7
D0
8
ACK
9
D7
1
D6
2
D5
Receiving Data
3
D4
4
ACK is not sent.
D3
1997 Microchip Technology Inc.
5
D2
6
D1
7
D0
8
ACK
9
transfer
Bus Master
terminates
P