PIC12C671-04/SM Microchip Technology, PIC12C671-04/SM Datasheet - Page 35

• Manufacturer Part Number: PIC12C671-04/SM
• Description: IC MCU OTP 1KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04/SM

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: SOIC
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 4 Channel
• Package: 8SOIJ
• Device Core: PIC
• Family Name: PIC12
• Maximum Speed: 4 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

2.3.1
1997 Microchip Technology Inc.
Oscillator / Resonator Start-up
As the device voltage increases from V
required for the oscillator to start oscillating depends on many factors. These include:
• Crystal / resonator frequency
• Capacitor values used (C1 and C2 in
• Device V
• System temperature
• Series resistor value (and type) if used (Rs in
• Oscillator mode selection of device (which selects the gain of the internal oscillator inverter)
• Crystal quality
• Oscillator circuit layout
• System noise
Figure 2-2
oscillator waveform can be quite low (less than 50% of device V
tered at V
Figure 2-2: Example Oscillator / Resonator Start-up Characteristics
DD
DD
graphs an example oscillator / resonator start-up. The peak-to-peak voltage of the
Maximum V
/2 (refer to
rise time
DD
parameters D033
of System
Voltage
0V
Crystal Start-up Time
Figure
and
Section 2. Oscillator
SS
Device V
, the oscillator will start its oscillations. The time
D043
2-1)
Figure
in the
DD
2-1)
“Electrical Specifications”
Time
DD
) where the waveform is cen-
DS31002A-page 2-5
section).
2