PIC16F707-I/ML Microchip Technology, PIC16F707-I/ML Datasheet - Page 46

• Manufacturer Part Number: PIC16F707-I/ML
• Description: IC MCU 8BIT FLASH 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F707-I/ML

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 36
• Program Memory Type: FLASH
• Ram Size: 363 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Controller Family/series: PIC16F
• No. Of I/o's: 36
• Ram Memory Size: 363Byte
• Cpu Speed: 20MHz
• No. Of Timers: 6
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, AUSART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 14 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16F707/PIC16LF707
4.5.5
The PIR2 register contains the interrupt flag bits, as
shown in Register 4-5.
REGISTER 4-5:
DS41418A-page 46
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3-1
bit 0
TMR3GIF
R/W-0
PIR2 REGISTER
TMR3GIF: Timer3 Gate Interrupt Flag bit
1 = Timer3 gate is inactive
0 = Timer3 gate is active
TMR3IF: Timer3 Overflow Interrupt Flag bit
1 = Timer3 register overflowed (must be cleared in software)
0 = Timer3 register did not overflow
TMRBIF: TimerB Overflow Interrupt Flag bit
1 = TimerB register has overflowed (must be cleared in software)
0 = TimerB register did not overflow
TMRAIF: TimerA Overflow Interrupt Flag bit
1 = TimerA register has overflowed (must be cleared in software)
0 = TimerA register did not overflow
Unimplemented: Read as ‘0’
CCP2IF: CCP2 Interrupt Flag bit
Capture Mode
1 = A Timer1 register capture occurred (must be cleared in software)
0 = No Timer1 register capture occurred
Compare Mode
1 = A Timer1 register compare match occurred (must be cleared in software)
0 = No Timer1 register compare match occurred
PWM Mode
Unused in this mode
TMR3IF
R/W-0
PIR2: PERIPHERAL INTERRUPT REQUEST REGISTER 2
W = Writable bit
‘1’ = Bit is set
TMRBIF
R/W-0
TMRAIF
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
—
Note:
Interrupt flag bits are set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the global
enable bit, GIE of the INTCON register.
User
appropriate interrupt flag bits are clear prior
to enabling an interrupt.
U-0
—
software
 2010 Microchip Technology Inc.
x = Bit is unknown
U-0
should
—
ensure
CCP2IF
R/W-0
bit 0
the