PIC24HJ12GP201-I/SO Microchip Technology, PIC24HJ12GP201-I/SO Datasheet - Page 102

• Manufacturer Part Number: PIC24HJ12GP201-I/SO
• Description: IC PIC MCU FLASH 4KX24 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ12GP201-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 12KB (4K x 24)
• Package / Case: 18-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 6-ch x 10-bit or 6-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164339 - MODULE SKT FOR PM3 28SOIC
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24HJ12GP201/202
TABLE 10-1:
10.4.2.2
In contrast to inputs, the outputs of the peripheral pin
select options are mapped on the basis of the pin. In
this case, a control register associated with a particular
pin dictates the peripheral output to be mapped. The
RPORx registers are used to control output mapping.
Like the RPINRx registers, each register contains sets
of 5-bit fields, with each set associated with one RPn
pin (see Register 10-10 through Register 10-17). The
value of the bit field corresponds to one of the periph-
erals, and that peripheral’s output is mapped to the pin
(see Table 10-2 and Figure 10-3).
The list of peripherals for output mapping also includes
a null value of ‘00000’ because of the mapping
technique. This permits any given pin to remain
unconnected from the output of any of the pin
selectable peripherals.
DS70282D-page 100
External Interrupt 1
External Interrupt 2
Timer2 External Clock
Timer3 External Clock
Input Capture 1
Input Capture 2
Input Capture 7
Input Capture 8
Output Compare Fault A
UART1 Receive
UART1 Clear To Send
SPI1 Data Input
SPI1 Clock Input
SPI1 Slave Select Input
Note 1:
Unless otherwise noted, all inputs use the Schmitt input buffers.
Output Mapping
Input Name
SELECTABLE INPUT SOURCES (MAPS INPUT TO FUNCTION)
Function Name
Preliminary
SCK1IN
U1CTS
SS1IN
OCFA
U1RX
T2CK
T3CK
SDI1
INT1
INT2
IC1
IC2
IC7
IC8
FIGURE 10-3:
U1RTS Output enable 4
U1TX Output enable
OC1 Output Enable
OC2 Output Enable
RPINR10
RPINR10
RPINR20
RPINR11
RPINR18
RPINR18
RPINR20
RPINR21
Register
U1RTS Output 4
RPINR0
RPINR1
RPINR3
RPINR3
RPINR7
RPINR7
U1TX Output
OC1 Output
OC2 Output
Default
Default
RPnR<4:0>
MULTIPLEXING OF
REMAPPABLE OUTPUT
FOR RPn
© 2009 Microchip Technology Inc.
18
18
19
19
0
0
3
3
(1)
Output Enable
Output Data
Configuration
U1CTSR<4:0>
OCFAR<4:0>
U1RXR<4:0>
SCK1R<4:0>
T2CKR<4:0>
T3CKR<4:0>
INT1R<4:0>
INT2R<4:0>
SDI1R<4:0>
SS1R<4:0>
IC1R<4:0>
IC2R<4:0>
IC7R<4:0>
IC8R<4:0>
Bits
RPn