PIC18F45J50-I/PT Microchip Technology, PIC18F45J50-I/PT Datasheet - Page 239

• Manufacturer Part Number: PIC18F45J50-I/PT
• Description: IC PIC MCU FLASH 32K 2V 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F45J50-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 2.25 V to 2.75 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183032, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Controller Family/series: PIC18
• No. Of I/o's: 22
• Ram Memory Size: 3776Byte
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Embedded Interface Type: EUSART, I2C, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.0
PIC18F46J50 Family devices have two Enhanced
Capture/Compare/PWM (ECCP) modules: ECCP1 and
ECCP2. These modules contain a 16-bit register, which
can operate as a 16-bit Capture register, a 16-bit
Compare register or a PWM Master/Slave Duty Cycle
register. These ECCP modules are upward compatible
with CCP
© 2009 Microchip Technology Inc.
Note:
ENHANCED
CAPTURE/COMPARE/PWM
(ECCP) MODULE
Register and bit names referencing one of
the two ECCP modules substitute an ‘x’ for
the module number. For example, regis-
ters CCP1CON and CCP2CON, which
have the same definitions, are called
CCPxCON. Figures and diagrams use
ECCP1-based names, but those names
also apply to ECCP2, with a “2” replacing
the illustration name’s “1”.
When writing firmware, the “x” in register
and bit names must be replaced with the
appropriate module number.
PIC18F46J50 FAMILY
ECCP1 and ECCP2 are implemented as standard CCP
modules with enhanced PWM capabilities. These
include:
• Provision for two or four output channels
• Output Steering modes
• Programmable polarity
• Programmable dead-band control
• Automatic shutdown and restart
The enhanced features are discussed in detail in
Section 17.5 “PWM (Enhanced Mode)”.
Note:
PxA, PxB, PxC and PxD are associated
with the remappable pins (RPn).
DS39931C-page 239