DSPIC30F2010-20I/MM Microchip Technology, DSPIC30F2010-20I/MM Datasheet - Page 111

• Manufacturer Part Number: DSPIC30F2010-20I/MM
• Description: IC DSPIC MCU/DSP 12K 28QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2010-20I/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 20
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 20
• Flash Memory Size: 12KB
• Supply Voltage Range: 2.5V To 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F2010-20I/MMG; DSPIC30F201020IMM; DSPIC30F201020IMM

18.0
The 10-bit high-speed Analog-to-Digital Converter
(ADC) allows conversion of an analog input signal to a
10-bit digital number. This module is based on a Suc-
cessive Approximation Register (SAR) architecture,
and provides a maximum sampling rate of 500 ksps.
The ADC module has up to 16 analog inputs which are
multiplexed into four sample and hold amplifiers. The
output of the sample and hold is the input into the con-
verter, which generates the result. The analog refer-
ence voltages are software selectable to either the
device supply voltage (AV
on the (V
ture of being able to operate while the device is in Sleep
mode.
FIGURE 18-1:
© 2011 Microchip Technology Inc.
Note:
AN0
AN1
AN2
AN3
AN4
AN5
10-BIT HIGH-SPEED ANALOG-
TO-DIGITAL CONVERTER
(ADC) MODULE
REF
V
V
AV
AV
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
“dsPIC30F Family Reference Manual”
(DS70046).
REF
REF
+/V
DD
SS
+
-
REF
-) pin. The ADC has a unique fea-
10-BIT HIGH-SPEED ADC FUNCTIONAL BLOCK DIAGRAM
DD
/AV
SS
) or the voltage level
AN0
AN1
AN2
AN3
AN4
AN5
AN1
AN0
AN3
AN1
AN4
AN2
AN5
+
+
-
+
-
+
-
-
S/H
S/H
S/H
S/H
Sample
CH1
CH2
CH3
CH0
The ADC module has six 16-bit registers:
• A/D Control Register1 (ADCON1)
• A/D Control Register2 (ADCON2)
• A/D Control Register3 (ADCON3)
• A/D Input Select Register (ADCHS)
• A/D Port Configuration Register (ADPCFG)
• A/D Input Scan Selection Register (ADCSSL)
The ADCON1, ADCON2 and ADCON3 registers con-
trol the operation of the ADC module. The ADCHS reg-
ister selects the input channels to be converted. The
ADPCFG register configures the port pins as analog
inputs or as digital I/O. The ADCSSL register selects
inputs for scanning.
The block diagram of the ADC module is shown in
Figure
Note:
18-1.
CH1,CH2,
CH3,CH0
10-bit Result
Switches
The
SMPI<3:0>, BUFM and ALTS bits, as well
as the ADCON3 and ADCSSL registers,
must not be written to while ADON = 1.
This would lead to indeterminate results.
Input
ADC
dsPIC30F2010
SSRC<2:0>,
16-word, 10-bit
Sample/Sequence
Dual Port
Buffer
Conversion Logic
Control
Input MUX
Control
ASAM,
DS70118J-page 111
SIMSAM,