PIC24HJ64GP502-I/MM Microchip Technology, PIC24HJ64GP502-I/MM Datasheet - Page 8

• Manufacturer Part Number: PIC24HJ64GP502-I/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-I/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 4KB
• Cpu Speed: 40MIPS
• No. Of Timers: 7
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20. Module: UART
21. Module: ADC
EXAMPLE 1:
DS80441F-page 8
AD1CON1bits.ADON = 0;
__asm__ volatile ("REPEAT #50");
__asm__ volatile ("NOP");
Sleep();
Note:
Note:
The UART module will not generate consecutive
break characters. Trying to perform a back-to-back
Break character transmission will cause the UART
module to transmit the dummy character used to
generate the first Break character instead of
transmitting the second Break character. Break
characters are generated correctly if they are
followed by non-Break character transmission.
Work around
None.
Affected Silicon Revisions
If the ADC module is in an enabled state when the
device enters Sleep mode as a result of executing
a PWRSAV #0 instruction, the device power-down
current (I
in the device data sheet. This may happen even if
the ADC module is disabled by clearing the ADON
bit prior to entering Sleep mode.
Work around 1:
In order to remain within the I
listed in the device data sheet, the user software
must completely disable the ADC module by
setting the ADC Module Disable bit in the
corresponding Peripheral Module Disable register
(PMDx), prior to executing a PWRSAV
instruction.
Work around 2:
If the ADC module was previously initialized and
enabled, before entering Sleep, execute the lines
of code provided in
Affected Silicon Revisions
A1
A1
X
X
The ADC module must be reinitialized by
the user application before resuming ADC
operation.
Unlike
application does not need to reinitialize
the ADC module; however, it is necessary
to re-enable the ADC module by setting
the ADON bit after waking from Sleep.
A2
A2
X
X
PD
) may exceed the specifications listed
A3
A3
X
X
Work
Example
A4
A4
X
X
around
1.
PD
1,
specifications
//Disable the ADC module
//Wait 50 Tcy
//Repeat NOP 51 times
// Execute PWRSAV #0 and go to Sleep
the
user
#0
22. Module: RTCC
23. Module: JTAG
24. Module: All
The RTCC module gets reset on any device
Reset, instead of getting reset only on a POR or
BOR.
Work around
None.
Affected Silicon Revisions
On 28-pin devices, JTAG Boundary Scan does not
function correctly for pin 7. Both pins 6 and 7
respond to stimulus applied to pin 7.
Work around
Do not include pin 7 in the JTAG Boundary Scan
chain for 28-pin devices.
Affected Silicon Revisions
The affected silicon revisions listed below are not
warranted for operation at 150ºC.
Work around
Only use the affected revisions of silicon for Hi-Temp
operating range from -40ºC to +140ºC.
Affected Silicon Revisions
A1
A1
A1
X
X
X
A2
A2
A2
X
X
X
A3
A3
A3
X
X
X
© 2010 Microchip Technology Inc.
A4
A4
A4
X
X
X