PIC16F84A-20I/SS Microchip Technology, PIC16F84A-20I/SS Datasheet - Page 211

• Manufacturer Part Number: PIC16F84A-20I/SS
• Description: IC MCU FLASH 1KX14 EE 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F84A-20I/SS

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Program Memory Type: FLASH
• Eeprom Size: 64 x 8
• Ram Size: 68 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP
• Controller Family/series: PIC16F
• No. Of I/o's: 13
• Eeprom Memory Size: 64Byte
• Ram Memory Size: 68Byte
• Cpu Speed: 20MHz
• No. Of Timers: 1
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 68 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• Data Rom Size: 64 B
• Height: 1.75 mm
• Length: 7.2 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4 V
• Width: 5.3 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SS1-1 - SOCKET TRANSITION 20DIP 20SSOPI3-DB16F84A - BOARD DAUGHTER ICEPIC3AC164307 - MODULE SKT FOR PM3 28SSOPAC164018 - MODULE SKT PROMATEII 20SSOP
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

14.5.1
14.5.2
1997 Microchip Technology Inc.
PWM Period
PWM Duty Cycle
The PWM period is specified by writing to the PR2 register. The PWM period can be calculated
using the following formula:
PWM frequency (F
When TMR2 is equal to PR2, the following three events occur on the next increment cycle:
• TMR2 is cleared
• The CCPx pin is set (exception: if PWM duty cycle = 0%, the CCPx pin will not be set)
• The PWM duty cycle is latched from CCPRxL into CCPRxH
The PWM duty cycle is specified by writing to the CCPRxL register and to the DCxB1:DCxB0
(CCPxCON<5:4>) bits. Up to 10-bit resolution is available: the CCPRxL contains the eight MSbs
and CCPxCON<5:4> contains the two LSbs. This 10-bit value is represented by DCxB9:DCxB0.
The following equation is used to calculate the PWM duty cycle:
The DCxB9:DCxB0 bits can be written to at any time, but the duty cycle value is not latched into
CCPRxH until after a match between PR2 and TMR2 occurs (which is the end of the current
period). In PWM mode, CCPRxH is a read-only register.
The CCPRxH register and a 2-bit internal latch are used to double buffer the PWM duty cycle.
This double buffering is essential for glitchless PWM operation.
When CCPRxH and 2-bit latch match the value of TMR2 concatenated with the internal 2-bit
Q clock (or two bits of the TMR2 prescaler), the CCPx pin is cleared. This is the end of the duty
cycle.
Maximum PWM resolution (bits) for a given PWM frequency:
Note:
Note:
PWM duty cycle = (DCxB9:DCxB0 bits value) • Tosc • (TMR2 prescale value), in units of time
PWM period = [(PR2) + 1] • 4 • T
The Timer2 postscaler is not used in the determination of the PWM frequency. The
postscaler could be used to have a servo update rate at a different frequency than
the PWM output.
If the PWM duty cycle value is longer than the PWM period, the CCPx pin will not
be cleared. This allows a duty cycle of 100%.
PWM
) is defined as 1 / [PWM period].
OSC
=
• (TMR2 prescale value), specified in units of time
log
log(2)
(
F
F
PWM
OSC
)
Section 14. CCP
bits
DS31014A-page 14-9
14