PIC16F84A-20I/SS Microchip Technology, PIC16F84A-20I/SS Datasheet - Page 470

• Manufacturer Part Number: PIC16F84A-20I/SS
• Description: IC MCU FLASH 1KX14 EE 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F84A-20I/SS

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Program Memory Type: FLASH
• Eeprom Size: 64 x 8
• Ram Size: 68 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP
• Controller Family/series: PIC16F
• No. Of I/o's: 13
• Eeprom Memory Size: 64Byte
• Ram Memory Size: 68Byte
• Cpu Speed: 20MHz
• No. Of Timers: 1
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 68 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• Data Rom Size: 64 B
• Height: 1.75 mm
• Length: 7.2 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4 V
• Width: 5.3 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SS1-1 - SOCKET TRANSITION 20DIP 20SSOPI3-DB16F84A - BOARD DAUGHTER ICEPIC3AC164307 - MODULE SKT FOR PM3 28SSOPAC164018 - MODULE SKT PROMATEII 20SSOP
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PICmicro MID-RANGE MCU FAMILY
25.4
DS31025A-page 25-12
COM0
COM1
COM2
COM3
T
T
FWR
FINT
LCD Interrupts
= T
= (T
Frame
Boundary
(T
FRAME
FWR
FWR
The LCD timing generation provides an interrupt that defines the LCD frame timing. This interrupt
can be used to coordinate the writing of the pixel data with the start of a new frame. Writing pixel
data at the frame boundary allows a visually crisp transition of the image. This interrupt can also
be used to synchronize external events to the LCD. For example, the interface to an external seg-
ment driver, such as a Microchip AY0438, can be synchronized for segment data update to the
LCD frame.
A new frame is defined to begin at the leading edge of the COM0 common signal. The interrupt
will be set immediately after the LCD controller completes accessing all pixel data required for a
frame. This will occur at a certain fixed time before the frame boundary as shown in
The LCD controller will begin to access data for the next frame within T
Figure 25-7:
/2 - (2T
/2 - (1T
/(LMUX1:LMUX0 + 1)
CY
CY
+ 40 ns))
+ 40 ns))
Example Waveforms in 1/4 MUX Drive
min.
max.
1 Frame
LCD
Interrupt
occurs
T
FWR
T
FINT
Controller accesses
next frame data
Frame
Boundary
1997 Microchip Technology Inc.
FWR
after the interrupt.
Figure
V3
V2
V1
V0
V3
V2
V1
V0
V3
V2
V1
V0
V3
V2
V1
V0
25-7.