STM8L152K6T6 STMicroelectronics, STM8L152K6T6 Datasheet - Page 121

• Manufacturer Part Number: STM8L152K6T6
• Description: IC MCU 8BIT 32KB FLASH 32LQFP
• Manufacturer: STMicroelectronics
• Series: STM8L EnergyLiter

Specifications of STM8L152K6T6

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, IR, LCD, POR, PWM, WDT
• Number Of I /o: 29
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 21x12b, D/A 1x12
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Processor Series: STM8L15x
• Core: STM8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 29
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWSTM8
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 21 Channel
• On-chip Dac: 12 bit, 1 Channel
• For Use With: 497-10594 - DEM FOR STM8L15X LOW PWR MODES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10510

STM8L151xx, STM8L152xx
Table 68.
11-Mar-2011
Date
Document revision history
Revision
6
Modified note on true open drain I/Os and I/O level columns in
Medium density STM8L15x pin description on page
Remapping option removed for USART1_TX, USART1_RX, and
USART1_CK on PC2, PC3 and PC4 in
STM8L15x pin description on page
Modified IDWDG_KR reset value in
map on page
Replaced VREF_OUT with VREFINT and TIMx_TRIG with TIMx_ETR.
Added
values for TIM1_DCR1, IWDG_KR, RTC_DR1, RTC_DR2,
RTC_SPRERH, RTC_SPRERL, RTC_APRER, RTC_WUTRH, and
RTC_WUTRL in
Added notes to certain values in
voltage on page 97
page
Modified OPT1 and OPT4 description in
description on page
Updated
replaced with “high sink I//Os”.
Updated R
page
Added Tape & Reel option to
ordering information scheme on page
Doc ID 15962 Rev 6
98.
96.
Table 7: Factory conversion registers on page
Section 9: Electrical parameters on page 59
HN and
36.
Table 9: General hardware register map on page
R
HN
and
56.
descriptions in
Section 9.3.11: Temperature sensor on
Figure 51: Medium density STM8L15x
Changes
Section 9.3.10: Embedded reference
26.
Table 9: General hardware register
Table 45: LCD characteristics on
118.
Table 5: Medium density
Table 13: Option byte
26.
Revision history
35. Modified reset
“standard I/Os”
Table 5:
121/122
36.